（一）論文及著述

期刊論文(國際):

1.J. S. C. Jang, J. B. Li, S. L. Lee, Y. S. Chang, S. R. Jian, J. C. Huang, T. G. Nieh, Prominent plasticity of Mg-based bulk metallic glass composites by ex-situ spherical Ti particles, Intermetallics, (2011) Accepted.

2.Guo-Ju Chen, Sheng-Rui Jian, Jason S.-C. Jang, Yung-Hui Shih, Yuan-Tsung Chen, Shien-Uang Jen, Jenh-Yih Juang, The effects of annealing temperature and sputtering power on the structure and magnetic properties of CoFeZrB thin films, Intermetallics, (2011) Accepted.

3.P. H. Tsai, S. K. Wang, S. R. Jian, I. S. Lee, Y. Z. Chang, Y. Z. Lin, J. S. C. Jang*, C. Li, Effect of Partial Crystallization On The Mechanical Properties of (Cu42Zr42Al8Ag8)99.5Si0.5 Bulk Metallic Glass, Materials Technology. (2011) Accepted.

4.S. K. Wang, C. C. Fu, Z. W. Cai, S. R. Jian, J. S. C. Jang*, H. Z. Zhang, H. C. Hsu, Microstructure and Room Temperature Mechanical Properties of The Ni3Si -based Alloy with Titanium Addition, Materials Technology. (2011) Accepted.

5.Sheng-Rui Jian, Hou-Guang Chen, Guo-Ju Chen, Jason S. C. Jang, Jenh-Yih Juang, Structural and nanomechanical properties of a-plane ZnO thin films deposited under different oxygen partial pressures, Current Applied Physics, (2011) in press. Impact Factor: 1.586, Rank Factor: 45/105, Subject Categories: Applied Physics.

6.S. K. Wang, T. C. Lin, S. R. Jian, J. Y. Juang, Jason S. C. Jang, J. Y. Tseng, Effects of post-annealing on the structural and nanomechanical properties of Ga-doped ZnO thin films deposited on glass substrate by rf-magnetron sputtering, Applied Surface Science 258 (2011) 1261– 1266. Impact Factor: 1.616, Rank Factor: 39/105, Subject Categories: Applied Physics.

7.Pei Hua Tsai, I Sui Lee, Sheng Rui Jian, Jason Shian Ching Jang*, Mechanical properties and thermal stability of a Cu-based bulk metallic glass microalloyed with silicon, J. of the Chinese Institute of Engineers, 34 (2011) 917–923. SCI/EI, Impact Factor: 0.219, Rank Factor: 48/87. Subject Categories: Engineering, Multidiciplinary.

8.J. B. Li, J. S. C. Jang*, S. R. Jian, K. W. Chen, J. F. Lin, J. C. Huang, Plasticity improvement of ZrCu-based bulk metallic glass by ex-situ dispersed Ta particles, Materials Science and Engineering, A 528 (2011) 8244–8248. SCI/EI, Impact Factor: 1.901, Rank Factor: 53/212. Subject Categories: Materials Science, Multidiciplinary. (NSC95-2210-E-214-015-MY3 and NSC98-2221-E-008-116-MY3)

9.Huei-Sen Wang, Mau-Sheng Chiou, Hou-Guang Chen, Jason Shian-Ching Jang, The effects of initial welding temperature and welding parameters on the crystallization behaviors of laser spot welded Zr-based bulk metallic glass, Materials Chemistry and Physics, 129 (2011) 547–552. Impact Factor: 2.353, Rank Factor: 49/212. Subject Categories: Materials Science, Multidisciplinary

10.Jason S. C. Jang*, K. C. Wu, S. R. Jian, P. J. Hsieh, J. C. Huang, and C. T. Liu, A Ni-free Zr-Based Bulk Metallic Glass With Remarkable Plasticity, J. Alloys and Compounds, 509S (2011) S109–S114. Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering. (NSC95-2210-E-214-015-MY3 and NSC98-2221-E-008-116- MY3)

11.C. Y. Yen, S. R. Jian, G. J. Chen, C. M. Lin, H. Y. Lee, W. C. Ke, Y. Y. Liao, P. F. Yang, C. T. Wang, Y. S. Lai, Jason S. C. Jang, J. Y. Juang, Influence of annealing temperature on the structural, optical and mechanical properties of ALD-derived ZnO thin films, Applied Surface Science 257 (2011) 7900–7905. Impact Factor: 1.616, Rank Factor: 39/105, Subject Categories: Applied Physics.

12.J. S. C. Jang*, T. H. Li, S. R. Jian, J. C. Huang, T. G. Nieh, Effects of Characteristics of Mo dispersions on the Plasticity of Mg-Based Bulk Metallic Glass Composites, Intermetallics, 19 (2011) 738-743. SCI/EI, Impact Factor: 2.327, Rank Factor: 4/70. Subject Categories: Metallurgy and Metallurgical Engineering (NSC95-2210-E-214-015-MY3 and NSC98-2221-E-008-116- MY3)

13.K. W. Chen, S. R. Jian, P. J. Wei, J. S. C. Jang, J. F. Lin, The study of loading rate effect of a Cu-based bulk metallic glass during nanoindentation, J. Alloys and Compounds, 504S (2010) S69–S73. Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering.

14.Sheng-Rui Jian, Jenh-Yih Juang, Nie-Chuan Chen, Jason S.-C. Jang, J. C. Huang, and Yi-Shao Lai, Nanoindentation-induced structural deformation in GaN/AlN multilayers, Nanoscience and Nanotechnology Letters, Vol. 2 (2010) 1–7. SCI, Impact Factor: Rank Factor:  Subject Categories: Materials Science, Multidiciplinary.

15.Huei-Sen Wang, Hou-Guang Chen, Jason Shian-Ching Jang, Combination of a Nd:YAG laser and a liquid cooling device to (Zr53Cu30Ni9Al8)Si0.5 bulk metallic glass welding, Materials Science and Engineering A, A 528 (2010) 338–341. SCI/EI, Impact Factor: 1.901, Rank Factor: 53/212. Subject Categories: Materials Science, Multidiciplinary.

16.Cheng-Yo Yen, Sheng-Rui Jian, Yi-Shao Lai, Ping-Feng Yang, Ying-Yen Liao, Jason Shian-Ching Jang, Tjung-Han Lin, Jenh-Yih Juang, Mechanical properties of the hexagonal HoMnO3 thin films by nanoindentation, J. Alloys and Compounds, 508 (2010) 523–527. SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering.

17.Yuan-Tsung Chen, Jiun-Yi Tseng, C.C. Chang, W.C. Liu, Jason Shian-Ching Jang. Effect of field-annealing on magnetostriction and tunneling magnetoresistance of Co/AlOx/Co/IrMn junctions, J. Alloys and Compounds, 489 (2010) 242–245. SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering.

18.P. J. Hsieh, L. C. Yang, H. C. Su, C. C. Lu, J. S. C. Jang, Improvement of mechanical properties in MgCuYNdAg bulk metallic glasses with adding Mo particles, J. Alloys and Compounds, 504S (2010) S98–S101. SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering.

19.J. S. C. Jang*, Y. S. Chang, T. H. Li, P. J. Hsieh, J. C. Huang, and Chi. Y. A. Tsao, Plasticity Enhancement of Mg58Cu28.5Gd11Ag2.5 Based Bulk Metallic Glass Composites Dispersion Strengthened by Ti Particles, J. Alloys and Compounds, 504S (2010) S102–S105. SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering. (NSC95-2210-E-214-015-MY3 and NSC98-2221-E-008-116- MY3)

20.Sheng Rui Jian, G. J. Chen, H. G. Chen, Jason S. C. Jang, Y. Y. Liao, P. F. Yang, Y. S. Lai, M. R. Chen, H. L. Kao, J. Y. Juang, Cross-sectional transmission electron microscopy studies for deformation behaviors of AlN thin films under Berkovich nanoindentation, J. of Alloy and Compounds, 504S (2010) S395–S398. SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering.

21.W. Kai, P.C. Kao, P.C. Lin, I.F. Ren, J. S. C. Jang, Effects of Si addition on the oxidation behavior of a Cu-Zr-based bulk metallic alloy, Intermetallics, 18 (2010) 1994-1999. SCI/EI, Impact Factor: 2.327, Rank Factor: 4/70. Subject Categories: Metallurgy and Metallurgical Engineering.

22.S. R. Jian, J. B. Li, K. W. Chen, Jason S. C. Jang, P. J. Wei, J. F. Lin, Mechanical responses of Mg-based bulk metallic glasses, Intermetallics, 18 (2010) 1930-1935. SCI/EI, Impact Factor: 2.327, Rank Factor: 4/70. Subject Categories: Metallurgy and Metallurgical Engineering.

23.Y. H. Lai, H. M. Chen, C. J. Lee, J. C. Huang, J. S. C. Jang, Strain burst speeds in metallic glass micropillars, Intermetallics, 18 (2010) 1893-1897. SCI/EI, Impact Factor: 2.327, Rank Factor: 4/70. Subject Categories: Metallurgy and Metallurgical Engineering.

24.J. S. C. Jang*, W. J. Li, T. H. Li, S. R. Jian, J. C. Huang, T. G. Nieh, Thermoplastic Forming Ability of A Mg-base Bulk Metallic Glass Composites Reinforced With Porous Mo Particles, Intermetallics, 18 (2010) 1964–1968. SCI/EI, Impact Factor: 2.327, Rank Factor: 4/70. Subject Categories: Metallurgy and Metallurgical Engineering. (NSC95-2210-E-214-015- MY3 and NSC98-2221-E-008-116- MY3)

25.Kuan-Wei Chen, Sheng-Rui Jian, Pal-Jen Wei, Jason S.-C. Jang, Jen-Fin Lin, A study of the relationship between semi-circular shear bands and pop-ins induced by indentation in bulk metallic glasses, Intermetallics, 18 (2010) 1572-1578. SCI/EI, Impact Factor: 2.327, Rank Factor: 4/70. Subject Categories: Metallurgy and Metallurgical Engineering.

26.Pai-Tsung Chiang, Guo-Ju Chen, Sheng-Rui Jian, Yung-Hui Shih, Jason Shian-Ching Jang, Chung-Hsu Lai, Surface Antimicrobial Capabilities of the ZrAlNiCuSi Metallic Glass Thin Film for Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Acinetobacter baumannii and Candida albicans, Fooyin Journal of Health Science, 2(1) (2010) 12-20.

27.J. P. Chu, J. C. Huang, J. S. C. Jang, Y. C. Wang, P. K. Liaw, Thin Film Metallic Glasses: Preparations, Properties and Applications (Review article), JOM, 62 (2010) 19-24, SCI/EI, Impact Factor: 1.043, Rank Factor: 14/70. Subject Categories: Metallurgy and Metallurgical Engineering. (NSC96-2218-E-110-001 and NSC97-2112-M-214-002-MY3)

28.H. M. Chen, C. J. Lee, J. C. Huang, T. H. Li, J. S. C. Jang, Flow serration and shear-band propagation in porous Mo particles reinforced Mg-based bulk metallic glass composites, Intermetallics, 18 (2010) 1240-1243. SCI/EI, Impact Factor: 2.327, Rank Factor: 4/70. Subject Categories: Metallurgy and Metallurgical Engineering.

29.Huei-Sen Wang, Hou-Guang Chen, Jason Shian-Ching Jang, Microstructure evolution in Nd:YAG laser-welded (Zr53Cu30Ni9Al8)Si0.5 bulk metallic glass alloy, J. of Alloy and Compounds, 495 (2010) 224-228. SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering.

30.Sheng Rui Jian, Guo Ju Chen, Jason S. C. Jang, Yi Shao Lai, Nanomechanical properties of AlN(1 0 3) thin films by nanoindentation, J. of Alloy and Compounds, 494 (2010) 219–222. SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering.

31.S. X. Song, J. S. C. Jang, J. C. Huang, T. G. Nieh, Inhomogeneous to homogeneous transition in an Au-based metallic glass and its deformation maps, Intermetallics, 18 (2010) 702–709. SCI/EI, Impact Factor: 2.327, Rank Factor: 4/70. Subject Categories: Metallurgy and Metallurgical Engineering.

32.S. R. Jian, J. S. C. Jang, "Field emission characteristics of carbon nanotubes post-treated with high-density Ar plasma", Applied Surface Science, 256 (2010) 2184–2188. SCI, Impact Factor: 1.616, Rank Factor: 39/105, Subject Categories: Applied Physics.

33.J. S. C. Jang*, D. J. Pan, S. R. Jian, Y. H. Wu, J. C. Huang, T. G. Nieh. “Thermal and Mechanical Properties of The Zr-based Bulk Metallic Glass Composites With Ductile In-situ Dispersed Ta-rich particles”, Intermetallics, 18 (2010) 560–564. SCI/EI, Impact Factor: 2.327, Rank Factor: 4/70. Subject Categories: Metallurgy and Metallurgical Engineering (NSC95-2221-E-214-015, NSC96-2218-E-110-001 and NSC97-2112-M-214-002-MY3)

34.Jason S. C. Jang*, J. Y. Ciou, T. H. Li, J. C. Huang, T. G. Nieh, Dispersion Toughening of Mg-based Bulk Metallic Glass Reinforced with Porous Mo Particles, Intermetallics, 18 (2010) 451–458. SCI/EI, Impact Factor: 2.327, Rank Factor: 4/70. Subject Categories: Metallurgy and Metallurgical Engineering. (NSC95-2221-E-214-015, NSC96-2218-E-110-001 and NSC97-2112-M-214-002-MY3).

35.P. H. Tsai, I. S. Huang, T. H. Li, J. S. C. Jang*, J. C. Huang, K. C. Hsieh, CRYSTA- LLIZATION BEHAVIOR AND THERMAL STABILITY OF TWO-GLASSY PHASE ZR-BASED BULK METALLIC GLASSES, Advanced Materials Research, 89-91 (2010) 562-567. EI, Subject Categories: Materials Science, Multidisciplinary, (NSC 95-2210-E-214-015-MY3, NSC 96-2218-E-110-001)

36.K. J. Lee, Y. T. Chen, H. Z. Cheng, J. S. C. Jang, P. C. Chang, S. W. Lin, Y. D. Chen, Effect of Calcining Temperature of Ceramic Powders Prepared from TEOS/Boehmite Sol-Gel on Tribological Behavior of Brake Lining Materials, Materials Science Forum, 638-642 (2010) 950-955. EI, Subject Categories: Materials Science, Multidisciplinary.

37.Z. W. Hsiao, C. C. Fu, P. H. Tsai, J. S. C. Jang*, S. R. Jian. J. C. Huang, EFFECT OF NANO-CRYSTALLIZATION ON THE MECHANICAL PROPERTIES OF THE (Zr53Cu30Ni9Al8)99.5Si0.5 BULK METALLIC GLASS, Materials Science Forum, 638-642 (2010) 2933-2937. EI, Subject Categories: Materials Science, Multidisciplinary, (NSC 95-2210-E-214-015-MY3, NSC 96-2218-E-110-001)

38.G. J. Chen, Y. H. Shih, J. S. C. Jang, S. R. Jian, P. H. Tsai, H. W. Chen, Magnetic Properties, Nanostructure, and Ordering Kinetics of Nb Additive FePtCu Films, Materials Science Forum, 638-642 (2010) 1743-1748. EI, Subject Categories: Materials Science, Multidisciplinary.

39.N. Y. Wu, C. J. Hsieh, Jason S. C. Jang, S. R Jian, Y. T. Chen, Thermal and mechanical properties of the (Cu36Zr48Al8Ag8)100-xSix (x = 0–1) amorphous alloys, Materials Science Forum. 638-642 (2010) 1627-1631. EI, Subject Categories: Materials Science, Multidisciplinary.

40.C. J. Lee, Y. H. Lai, C. W. Tang, J. C. Huang, J. S. C. Jang, Mechanical Behavior of Au-Based Metallic Glass in Micro-Scale at Ambient and Elevated Temperatures, Materials Transaction, vol. 50, pp. 2795-2800, 2009.12, SCI/EI, Impact Factor: 0.795, Rank Factor: 22/70, Subject Categories: Metallurgy and Metallurgical Engineering.

41.Jason S. C. Jang*, S. R. Jian, T. H. Li, J. C. Huang, Chi Y. A. Tsao, C. T. Liu, Structural and mechanical characterizations of ductile Fe particles-reinforced Mg-based bulk metallic glass composites, J. of Alloy and Compounds, 485, 290-294. 2009.11, SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering. (NSC 95-2210-E-214-015-MY3, NSC 96-2218-E-110-001)

42.J. C. Huang, J. P. Chu, J. S. C. Jang, Recent progress in metallic glasses in Taiwan (Review article), Intermetallics, vol. 17, pp. 973-987, 2009.12, SCI/EI, Impact Factor: 2.231, Rank Factor: 4/70. Subject Categories: Metallurgy and Metallurgical Engineering (NSC95-2221-214-015-MY3, NSC96-2218-E-110-001)

43.Kuo-Jung Lee, Mao-Hsiang Hsu, Huy-Zu Cheng, Jason Shian-Ching Jang, San-Wo Lin, Cheng-Ching Lee, Sang-Chaur Lin, “Tribological and mechanical behavior of carbon nanotube containing brake lining materials prepared through sol–gel catalyst dispersion and CVD process”, J. of Alloy and Compounds, vol. 483, pp. 389-393, 2009.09. SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering

44.F. H. Chen, K. F. Chang, Chi Y. A. Tsao, M. L. T. Guo, J. C. Huang, J. S. C. Jang, “Microstructures and mechanical behaviors of Mg58Cu31Gd11 and Mg65Cu25Gd10 amorphous alloys synthesized by injection casting and melt spinning” J. of Alloy and Compounds, vol. 483, pp. 32-36, 2009.09. SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering

45.P. J. Hsieh, S. C. Lin, H. C. Su, J. S. C. Jang, “Glass forming ability and mechanical properties characterization on Mg58Cu31Y11−xGdx bulk metallic glasses”, Journal of Alloy and Compounds, vol. 483, pp. 32-36, 2009.09. SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering

46.T. W. Tang, Y. C. Chang, J. C. Huang, Q. Gao, J. S. C. Jang, Chi Y.A. Tsao, On thermomechanical properties of Au–Ag–Pd–Cu–Si bulk metallic glass, Materials Chemistry and Physics, vol. 116, pp. 569-572, 2009. 7. SCI/EI, Impact Factor: 2.015, Rank Factor: 49/212. Subject Categories: Materials Science, Multidisciplinary, (NSC95-2221-E-214-015-MY3, NSC96-2218-E-110-001)

47.Sheng-Rui Jian , Jason Shian-Ching Jang, "Berkovich nanoindentation on InP," J. of Alloys and Compounds, vol. 482, pp. 498-501, 2009.0, SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering

48.C. C. Tseng, J. H. Hsieh, S. C. Jang, Y. Y. Chang, W. Wu, "Microstructural analysis and mechanical properties of TaN-Ag nanocomposite thin films," Thin Solid Films, vol. 517, pp. 4970-4974, 2009.0, SCI/EI, Impact Factor: 1.727, Rank Factor: 4/16. Subject Categories: Surface coating

49.Sheng-Rui Jian, Guo-Ju Chen, Jason Shian-Ching Jang, Ying-Yen Liao, "Nanomechanical properties of FePtPd ternary alloy thin films," Thin Solid Film, vol. 517, pp. 4883-4887, 2009.0, SCI/EI, Impact Factor: 1.727, Rank Factor: 2/16, Subject Categories: Surface coating

50.G. J. Chen, C. Y. Lin, Y. H. Shih, S. R. Jian, J. S. C. Jang, "Carbon additive effects on the nanostructure and magnetic property of the Co–Fe–Zr–B–C films," Thin Solid Film, vol. 517, pp. 4994-4997, 2009.07. SCI/EI , Impact Factor: 1.727, Rank Factor: 4/16, Subject Categories: MATERIALS SCIENCE, COATING & FILMS.

51.C. W. Chu, Jason S. C. Jang*, S. M. Chiu, J. P. Chu, "Study of The Characteristics and Corrosion Behavior For The Zr-Based Metallic Glass Thin Film Fabricated by Pulse Magnetron Sputtering Process," Thin Solid Film, vol. 517, pp. 4930-4933, 2009.07, SCI/EI, Impact Factor: 1.727, Rank Factor: 4/16, Subject Categories: MATERIALS SCIENCE, COATING & FILMS.

52.C. W. Chu, Jason S. C. Jang*, H. W. Chen, T. L Chuang, "Enhanced Wear Resistance of The Cr-Based Thin Film Coating on Micro Drill By Doping with W-C-N," Thin Solid Film, vol. 517, pp. 5197-5201, 2009.07. SCI/EI, Impact Factor: 1.727, Rank Factor: 4/16, Subject Categories: MATERIALS SCIENCE, COATING & FILMS.

53.Kuo-Jung Lee, Mao-Hsiang Hsu, Huy-Zu Cheng , Jason Shian-Ching Jang, "Effect of C2H2/N2 Ratio on Tribological and Mechanical Behavior," Materials Transaction, vol. 50, no. 6, pp. 1531-1535, 2009.06. SCI/EI , Impact Factor: 0.795, Rank Factor: 22/70, Subject Categories: Metallurgy and Metallurgical Engineering

54.Jason S. C. Jang*, S. R. Jian, C. F. Chang, L. J. Chang, Y. C. Huang, T. H. Li, J. C. Huang, C. T. Liu, "Thermal and Mechanical Properties of the Zr53Cu30Ni9Al8 Based Bulk Metallic Glass Microalloyed with Silicon," J. of Alloy and Compounds, vol. 478, pp. 215-219, 2009.05,  SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy (NSC95-2221-E-214-015-MY3, NSC96-2218-E-110-001)

55.X. Du, J. C. Huang, K. C. Hsieh, J. S. C. Jang, P. K. Liaw, "Designing Ductile Zr Based Bulk Metallic Glasses with Phase Separated Microstructure," Advanced Eng. Mater., vol. 11, pp. 387-391, 2009.05. SCI/EI , Impact Factor: 1.761, Rank Factor: 61/212, Subject Categories: Materials Science, Multidisciplinary  (NSC95-2221-E-214-015-MY3, NSC96-2218-110-001)

56.Sheng-Rui Jian, Jason Shian-Ching Jang, Guo-Ju Chen, Hou-Guang Chen, Yuan-Tsung Chen, "Nanoindentation on a-plane ZnO thin films," J. Alloys and Compounds, vol. 479, pp. 348-351, 2009.05. SCI/EI, Impact Factor: 2.135, Rank Factor: 5/70. Subject Categories: Metallurgy and Metallurgical Engineering

57.H. M Chen, J. C. Huang, S. X. Song, T. G. Nieh, J. S. C. Jang, "Flow serration and shear-band propagation in bulk metallic glasses," Applied Physics Letter, vol. 94, pp. 14914-1~3, 2009.04. SCI, Impact Factor: 3.554, Rank Factor: 14/105, Subject Categories: Applied Physics (NSC 95-2221-E-013-MY3)

58.X. H. Du, J. C. Huang, J. S. C. Jang, K. C. Hsieh, P. K. Liaw, H. M. Chen, H. S. Chou, Y. H. Lai, "Phase-separated microstructures and shear-banding behavior in a designed Zr-based glass-forming alloy," Intermetallics, vol. 17, pp. 607-613, 2009.04. SCI/EI , Impact Factor: 2.231, Rank Factor: 4/70, Subject Categories: Metallurgy and Metallurgical Engineering  (NSC95-2221-E-214-015-MY3, NSC96-2218-110-001)

59.J. S. C. Jang*, C. F. Chang, Y. C. Huang, J. C. Huang, W. J. Chiang, C. T. Liu, "Viscous Flow and Microforming of a Zr-base Bulk Metallic Glass,"  Intermetallics, vol. 17, pp. 200-204, 2009.03. SCI/EI, Impact Factor: 2.231, Rank Factor: 4/70, Subject Categories: Metallurgy and Metallurgical Eng. (NSC95-2221-214-015-MY3, NSC96-2218-E-110-001, ISU97-07-01, ISU97-07-01-01)

60.H. M. Chen, X. H. Du, J. C. Huang, J. S. C. Jang, T. G. Nieh, "Analysis of plastic strain and deformation mode of a Zr-based bulk metallic glass in compression," Intermetallics, vol. 17, pp. 330-335, 2009.03. SCI/EI, Impact Factor: 2.231, Rank Factor: 4/70, Subject Categories: Metallurgy and Metallurgical Engineering, (NSC95-2221-214-015-MY3, NSC96-2218- E-110-001)

61.C. C. Fu, J. S. C. Jang*, I. S. Lee, H. S. Wang, "STRAIN RATE DEPENDENCE ON THE HIGH TEMPERATURE MECHANICAL BEHAVIOR OF THE Ni-18Si-3.0Nb-1.0Cr-0.2B INTERMETALLIC ALLOY," INTERNATIONAL JOURNAL OF MODERN PHYSICS B, vol. 23, no. 6,7, pp. 1040-1046, 2009.03. SCI, Impact Factor: 0.408, Rank Factor: 77/105, Subject Categories: Physics, Applied

62.C. C. Fu, J. S. C. Jang*, H. C. Tsai, T. H. Li, "EVOLUTION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE Ni-25Al-27.5Fe-1.0Nb INTERMETALLIC ALLOY AFTER THERMAL MECHANICAL TREATMENT," INTERNATIONAL JOURNAL OF MODERN PHYSICS B., vol. 23, no. 6,7, pp. 1053-1059, 2009.03. SCI , Impact Factor: 0.408, Rank Factor: 77/105, Subject Categories: physics, Applied

63.G. J. Chen, Y. H. Shih, J. S. C. Jang, S. R. Jian, W. C. Chang, J. C. A. Huang, "MAGNETIC PROPERTIES, NANOSTRUCTURE AND ORDERING KINETICS OF FePtCu THIN FILMS," INTERNATIONAL JOURNAL OF MODERN PHYSICS B, vol. 23, no. 6,7, pp. 1652-1657, 2009.03. SCI, Impact Factor: 0.408, Rank Factor: 77/105, Subject Categories: Physics, Applied

64.J. S. C. Jang*, S. F. Tsao, L. J. Chang, J. C. Huang, C. T. Liu, "Nanocrystallization of Zr61Al7.5 Cu17.5Ni10Si4 Metallic Glass," Intermetallics, vol. 17, pp. 56-64, 2009.01
SCI, Impact Factor: 2.231, Rank Factor: 4/70. Subject Categories: Metallurgy and Metallurgical Engineering (NSC95-2221-E-214-015 and NSC95-2218-E-110-006)

65.Chung-Ting Wang, Sheng-Rui Jian, Jason Shian-Ching Jang, Yi-Shao Lai, Ping-Feng Yang, "Multiscale simulation of nanoindentation on Ni (100) thin film," Applied Surface Science, vol. 255, no. 12, pp. 3240-3250, 2008.12. SCI/EI, Impact Factor: 1.576, Rank Factor: 4/16, Subject Categories: Materials Science, Coatings & Films
(NSC 97-2218-E-214-003)

66.Jason Shian-Ching Jang*, Chin-Tsung Tseng, Liang-Jan Chang, Ya-Ching Yeh, Jin-Long Jou, Jacob Chih-Ching Huang, "Thermoplastic forming properties and microreplication ability of a Magnesium-based bulk metallic glass," Advanced Engineering Materials, vol. 10, no. 11, pp. 1048-1052, 2008.11. SCI/EI, Impact Factor: 1.506, Rank Factor: 71/191, Subject Categories: Materials Science, Multidisciplinary, (NSC95-2221-214-015-MY3, NSC96-2218-E-110-001)

67.Y. C. Chang, J. C. Huang, C. W. Tang, C. I. Chang, J. S. C. Jang, "Viscous Flow Behavior and Workability of Mg-Cu-(Ag)-Gd Bulk Metallic Glasses," Materials Transactions, vol. 49, pp. 2605-2610, 2008.11. SCI/EI, Impact Factor: 0.753, Rank Factor: 22/63, Subject Categories: Metallurgy and Metallurgical Engineering (NSC95-2221- E-110-014-MY3)

68.S. R. Jian, J. S. C. Jang, Y.-S. Lai, P.-F. Yang, C.-S. Yang, H.-C. Wen, C-H. Tsai, "Mechanical properties of InGaN thin films deposited by metal-organic chemical vapor deposition," Materials Chemistry and Physics, vol. 109, no. 2-3, pp. 360-364, 2008.06. SCI, EI, Impact Factor: 1.799, Rank Factor: 55/191, Subject Categories: Materials Science, Multidisciplinary
(NSC96-2112-M-214-001)

69.C. W. Chu, Jason S. C. Jang*, G. J. Chen, S M. Chiu, "Characteristic Studies on the Zr-Based Metallic Glass Thin Film Fabricated by Magnetron Sputtering Process," Surface & Coatings Technology, vol. 202, pp. 5564-5566, 2008.06. SCI/EI, Impact Factor: 1.860, Rank Factor: 3/16, Subject Categories: Materials Science, Coatings & Films

70.Y. H. Lai, C. J. Lee, Y. T. Cheng, H. S. Chou, H. M. Chen, X. H. Du, C. I. Chang, Jacob C. Huang, S. R. Jain, J. S. C. Jang, T. G. Nieh, "Bulk and microscale compressive behavior of a Zr-based metallic glass," Scripta Materialia, vol. 58, no. 10, pp. 890-893, 2008.05. SCI/EI, Impact Factor: 2.887, Rank Factor: 2/63, Subject Categories: Metallurgy & Metallurgical Engineering

71.S. X. Song , J. S. C. Jang, T. G. Nieh, "Analyses of shear band emission in a Mg-based bulk metallic glass deformed at different nanoindentation rates," Intermetallics, vol. 16, pp. 676-681, 2008.05. SCI, Impact Factor: 2.034, Rank Factor: 4/63, Subject Categories: Metallurgy & Metallurgical Engineering, (NSC96-2218-E-110-001, NSC95-2221-E- 214-015-MY3)

72.P. H. Tan, L. C. Yang, P. T. Chiang, J. S. C. Jang, H. C. Chung, C. H. Kuo, "Inflammation-induced up-regulation of ionotropic glutamate receptor expression in human skin," British Journal of Anaesthesia, vol. 100, no. 3, pp. 380-384, 2008.03. SCI, Impact Factor: 2.679, Rank Factor: 4/22. Subject Categories: Anesthesiology (NSC 94-2314-B-214-004)

73.K. F. Chang, M. L. T. Guo, R. H. Kong, Chi Y. A. Tsao, J. C. Huang, J. S. C. Jang, "Mg-Cu-Gd layered composite plate synthesized via spray forming process," Materials Science and Engineering A, vol. 477, no. 1-2, pp. 58-62, 2008.01. SCI, Impact Factor: 1.806, Rank Factor: 54/191. Subject Categories: Materials Science, Multidiciplinary. (NSC96-2218-E-110-006)

74.Kuo-Jung Lee, Shi-Wei Lee, Jason Shian-Ching Jang, Huy-Zu Cheng, "Effect of sol-gel boehmite infiltration on tribological and mechanical behavior of braking lining materials," Wear, vol. 264, no. 3-4, pp. 337-348, 2008.01. SCI, Impact Factor: 1.509, Rank Factor: 16/105, Subject Categories: Engineering, Mechanical

75.J. S. C. Jang, J. Y. Ciou, T. H. Hung, J. C. Huang, and X. H. Du, "Enhanced mechanical performance of Mg metallic glass with porous Mo particles," Applied Physics Letter, vol. 92, pp. 011930-3, 2008.01. SCI, Impact Factor: 3.726, Rank Factor: 10/95, Subject Categories: Physics, Applied. (NSC96-2218-E-110-001, NSC95-2221-E-214-015-MY3)

76.G. J. Chen, L. S. Tseng, P. T. Chiang, J. S. C. Jang, Y. H. Shih, Y. L. Chai, "Nanostructure and magnetic properties of polycrystalline FePtxPd1-x ternary alloy films," J. of Surface Coating and Technology, vol. 202, pp. 937-940, 2007.12. SCI, Impact Factor: 1.559, Subject Categories: Materials Science, Coatings & Films

77.C. C. Fu, C. M. Chung, L. J. Chang, C. F. Chang, and J. S. C. Jang*, "Dependence of Strain Rate and Environment on the Mechanical Properties of the Ni-19Si-3Nb-1Cr-0.2B Intermetallic Alloy at High Temperature," Materials Science Forum, vol. 561-565, pp. 419-422, 2007.11. EI, (NSC93-2745-E-214-001)

78.J. S. C. Jang*, Y. C. Huang, C. H. Lee, I. S. Lee, and L. J. Chang, "Glass Forming Ability and Thermal Properties of A Cu-based Bulk Metallic Glass microalloyed with Silicon," Materials Science Forum, vol. 561-565, pp. 1341-1344, 2007.11. EI, (NSC95-2216-E-110-001)

79.X. H. Du, J. C. Huang, K. C. Hsieh, Y. H. Lai, H. M. Chen, J. S. C. Jang, P. K. Liaw, "Two-glassy-phase bulk metallic glass with remarkable plasticity," Applied Physics Letter, vol. 91, pp. 131901-131903, 2007.09. SCI, Impact Factor: 3.997, Subject Categories: Physics, Applied, (NSC96-2218-E-110-006, NSC95-2221-E-214-015-MY3)

80.C. C. Fu, J. S. C. Jang*, L. J. Chang, T. Y. Lin, C. M. Kuo, "Effect of Strain Rate and Environment on the Mechanical Properties of the Ni-19Si-3Nb-0.15B-0.1C Intermetallic Alloy at High Temperatures," Journal of Materials Science, vol. 42, no. 14, pp. 5327-5334, 2007.07. SCI, Impact Factor: 0.999, Rank Factor: 87/175, Subject Categories: Materials Science, Multidisciplinary, (NSC93-2745-E-214-001)

81.H. M. Chen, Y. C. Chang, T. H. Hung, X. H. Du, J. C. Huang, J. S. C. Jang, and P. K. Liaw, "Compression Behavior of Mg-Cu-Gd Bulk Metallic Glasses with Various Specimen Height to Diameter Ratios," Materials Transaction JIM, vol. 48, no. 7, pp. 1802-1805, 2007.07
SCI, Impact Factor: 0.927, Rank Factor: 21.5%, Subject Categories: Metallurgy & Metallurgical Engineering (NSC94-2216-E-214-002, NSC94-2216-E-110-021)

82.T. H. Hung, Y. C. Chang, Y. N. Wang, C. W. Tang, J. N. Kuo, H. M. Chen, Y. L. Tsai, J. C. Huang, J. S. C. Jang, and C. T. Liu, " Development of Mg Based Amorphous Alloys with Higher Amounts of Rare Earth Elements," Materials Transaction JIM, vol. 48, no. 7, pp. 1621-1625, 2007.07. SCI, Impact Factor: 0.927, Rank Factor: 21.5%. Subject Categories: Metallurgy & Metallurgical Engineering (NSC94-2216-E-214-002, NSC94-2216-E-110-021)

83.L. J. Chang, G. R. Fang, J. S. C. Jang, I. S. Lee, J. C. Huang, Chi Y.A. Tsao, and J. L. Jou, "Mechanical Properties of the Hot-Pressed Amorphous Mg65Cu20Y10Ag5 / NanoZrO2 Composite Alloy," Materials Transaction JIM, vol. 48, no. 7, pp. 1797-1801, 2007.07
SCI, Impact Factor: 0.927, Rank Factor: 21.5%. Subject Categories: Metallurgy & Metallurgical Engineering (NSC94-2216-E-110-021, NSC95-2221-E-214-015-MY3)

84.J. S. C. Jang, C. C. Tseng, L. J. Chang, C. F. Chang, W. J. Lee, J. C. Huang and C. T. Liu, "Glass Forming Ability and Thermal Properties of the Mg-Based Amorphous Alloys with Dual Rare Earth Elements Addition," Materials Transaction JIM, vol. 48, no. 7, pp. 1684-1688, 2007.07. SCI, Impact Factor: 0.927, Rank Factor: 21.5%
(NSC94-2216-E-110-021, NSC95-2221-E-214-015-MY3)

85.M. L. Ted Guo, Chi Y. A. Tsao, J. C. Huang, and J. S. C. Jang, "Thermal Stability and Mechanical Properties of Spray-Formed and Melt-Spun Al89La6Ni5 Metallic Glass Matrix Composites," Materials Transaction JIM, vol. 48, no. 7, pp. 1717-1721, 2007.07
SCI, Impact Factor: 0.927, Rank Factor: 21.5%. Subject Categories: Metallurgy & Metallurgical Engineering (NSC94-2216-E-110-021)

86.L. J. Chang, G. R. Fang, J. S. C. Jang, I.S. Lee, J.C. Huang, and Chi Y.A.Tsao, "Hot workability of the Mg65Cu20Y10Ag5 amorphous/nanoZrO2 composite alloy within supercooled temperature region," Key Engineering Materials, vol. 351, pp. 103-108, 2007.06. EI, NSC94-2216-E-110-021, NSC95-2221-E-214-015-MY3

87.M. L. T. Guo, Chi Y. A. Tsao, J. C. Huang, J. S. C. Jang, "Microstructure Characteristics of Spray-Formed and Melt-spum AI85Nd5Ni10 and AI89La6Ni5 Bulk Hybrid Composites," Key Engineering Materials, vol. 351, pp. 1-6, 2007.06. EI,

88.J. S. C. Jang, J. C. Fwu, L. J. Chang, G. J. Chen, and C. T. Hsu, "Study on the Solid-Phase Sintering by the Nano-Structured Heavy Tungsten Alloy Powder," J. of Alloy compounds, vol. 434-435, pp. 367-370, 2007.05. SCI, Rank Factor: 6/65. Subject Categories: Metallurgy & Metallurgical Engineering (NSC94-2623-7-214-001 and NSC94-2218-E-110)

89.L. J. Chang, J. S. C. Jang, B. C. Yang, and J. C. Huang, "Crystallization and Thermal Stability of the Mg65Cu25-xGd10Agx (x=0 ~ 10) Amorphous Alloys," J. of Alloy compounds, vol. 434-435, pp. 221-224, 2007.05. SCI, Rank Factor: 6/65. Subject Categories: Metallurgy & Metallurgical Engineering
(NSC93-2216-E-214-002, NSC94-2218-E-110-009)

90.P. Y. Lee, C. Lo, and J. S. C. Jang, "Consolidation of mechanically alloyed Mg49Y15Cu36 powders by vacuum hot pressing," J. of Alloys and Compounds, vol. 434-435, pp. 354-357, 2007.05. SCI, Rank Factor: 6/65. Subject Categories: Metallurgy & Metallurgical Engineering

91.J. S. C. Jang, I. H. Wang, L. J. Chang, G. J. Chen, T. H. Hong and J. C. Huang, "Crystallization Kinetics and Thermal Stability of the Zr60Al7.5Cu17.5Ni10Si4B1 Amorphous Alloy by Isothermal DSC and TEM Observation," Materials Science and Engineering A, vol. 449-451, pp. 511-516, 2007.03. SCI, Rank Factor: 29.1%. Subject Categories: Materials Science, Multidisciplinary (NSC93-2216-E-214-008, NSC94-2218-E-110-009)

92.Y. T. Cheng, T. H. Hung, J. C. Huang, P. J. Hsieh, and J. S. C. Jang, "Thermal Stability and Crystallization Kinetics of Mg-Cu-Y-B Quaternary Alloy," Materials Science & Engineering A, vol. A449-451, pp. 501-505, 2007.03. SCI, Rank Factor: 29.1%. Subject Categories: Materials Science, Multidisciplinary
(NSC94-2216-E-214-002, NSC94-2216-E-110-021)

93.P. Y. Lee, S. S. Hung, Jason S. C. Jang, and G. S. Chen, "Formation Of Ni57Zr20Ti22Pb1 Amorphous Powders by Mechanical Alloying," Materials Science Forum, vol. 539-543, pp. 2767-2772, 2007.02. EI.

94.T. H. Hung, J. C. Huang, Jason S. C. Jang, and S. C. Lu, "Improved thermal stability of amorphous ZrAICuNi alloys with Si and B," Materials Transaction, vol. 48, pp. 239-243, 2007.02. SCI, Impact Factor: 0.927, Rank Factor: 21.5, Subject Categories: Metallurgy & Metallurgical Engineering

95.T. H. Hung, Y. C. Chang, H. M. Chen, Y. L. Tsai, J. C. Huang, J. S. C. Jang and T. G. Nieh, "Thermal and Mechanical Properties of Mg-Cu(Ni)-Y(Gd)Amorphous Alloys," Materials Science Forum, vol. 539-543, pp. 1926-1931, 2007.02. EI,

96.L. J. Chang, J. H. Young, B. C. Jiang, J. S. C. Jang, J. C. Huang, Chi Y.A. Tsao, "MECHANICAL PROPERTIES OF THE MG-BASED AMORPHOUS/NANO ZIRCONIA COMPOSITE ALLOY," Materials Science Foum, vol. 539-543, pp. 925-930, 2007.01, EI, (NSC93-2216-E-214-015 and NSC94-2218-E-110-009)

97.L. J. Chang, B. C. Yang, P.T. Chiang, J. S. C. Jang, and J. C. Huang, "Glass Forming and Thermal Properties of the Mg65Cu25Gd10-xNdx (x=0 ~ 10) Amorphous Alloys," Materials Science Forum, vol. 539-543, pp. 2106-2110, 2007.01, EI, (NSC93-2216-E-214-002 and NSC94-2218-E-110-009)

98.K. J. Lee, S. W. Lee, Jason S. C. Jang, "Effect of Vacuum Infiltration Boehmite Gel on Tribological Behavior of Friction," Materials Science Forum, vol. 539-543, pp. 1016-1020, 2007.01. EI,

99.C. C. Fu, L. J. Chang, Y. C. Huang, P. W. Wong, and J. S. C. Jang, "Microstructure and Mechanical Properties of Solid-Phase Sintered Heavy Tungsten Alloy," Advanced Materials Research, vol. 15-17, pp. 575-580, 2007.01. EI,  (NSC94-2623-7-214-001)

100.J. S. C. Jang, L. J. Chang, T. H. Hung, and J. C. Huang, and C. T. Liu, "Thermal Stability and Crystallization of Zr-Al-Cu-Ni Based Amorphous Alloy Added with Boron and Silicon," Intermetallics, vol. 14, no. 7, pp. 951-956, 2006.07.國際期刊 SCI, Impact Factor: 2.219, Rank Factor: 3/65, Subject Categories: Metallurgy & Metallurgical Engineering, (NSC93-2216-E-214-002, NSC93-2216-E-214-008)

101.J. S. C. Jang, L. J. Chang, J. H. Young, J. C. Huang, Chi Y.A. Tsao, "Synthesis and Characterization of the Mg-Based Amorphous/ Nano ZrO2 Composite Alloy," Intermetallics, vol. 14, no. 7, pp. 945-950, 2006.07. SCI. Impact Factor: 2.219, Rank Factor: 3/65, Subject Categories: Metallurgy & Metallurgical Engineering,
(NSC93-2216-E-214-002, NSC93-2216-E-110-021)

102.M. L. Ted Guo, Chi Y. A. Tsao, J. C. Huang, and J. S. C. Jang, "Microstructure Evolution of spray-formed and melt-spun Al85Nd5Ni10 Bulk Hybrid Composites," Intermetallics, vol. 14, no. 7, pp. 1069-1074, 2006.07. SCI, Impact Factor: 2.219, Rank Factor: 3/65, Subject Categories: Metallurgy & Metallurgical Engineering, (NSC93-2216-E-110-021)

103.Y. T. Cheng, T. H. Hung, J. C. Huang, J. S. C. Jang, Chi Y. A. Tsao, and P. Y. Lee, "Effects of partial replacement of Cu and Y by B in Mg-Cu-Y alloys," Intermetallics, vol. 14, no. 7, pp. 866-870, 2006.02. SCI, Impact Factor: 2.219, Rank Factor: 3/65, Subject Categories: Metallurgy & Metallurgical Engineering, (NSC93-2216-E-110-021)

104.J. S. C. Jang, S. F. Tsao, L. J. Chang, G. J. Chen, and J. C. Huang, "Crystallization Kinetics of the Zr61Al7.5 Cu17.5Ni10Si4 Alloy Using Isothermal DSC and TEM Observation," J. of Non-Crystalline Solids, vol. 352, no. 1, pp. 71-77, 2006.01. SCI, Subject Categories: Materials Science, Multidisciplinary, (NSC92-2216-E-214-015 and NSC93-2216-E-214-001)

105.L. J. Chang, J. H. Young, J. S. C. Jang, J. C. Huang, and Chi Y. A. Tsao, "Synthesis of the magnesium-based nano/amorphous-composite alloy powder by the combination method of melt-spinning and mechanical alloying," Key Eng. Mater., vol. 313, pp. 97-104, 2006.01, SCI, Subject Categories: Materials Science, Multidisciplinary, (NSC93-2216-E-214-002, NSC93-2216-E-214-008)

106.Y. P. Hung, K. J. Wu, Chi Y. A. Tsao, J. C. Huang, P .L. Hsieh, J. S. C Jang, "AZ61 Mg with nano SiO2 particles prepared by spray forming plus extrusion," Key Eng. Mater., vol. 313, pp. 77-82, 2006.01, SCI, Subject Categories: Materials Science, Multidisciplinary, (NSC94-2216-E-214-002, NSC94-2216-E-110-021)

107.P. Y. Lee, C. Lo, J. S. C. Jang, and J. C. Huang, "Mg-Y-Cu Bulk Nanocrystalline Matrix Composites Containing WC Particles," Key Eng. Mater., vol. 313, pp. 25-30, 2006.01, SCI, Subject Categories: Materials Science, Multidisciplinary, (NSC94-2216-E-214-002, NSC94-2216-E-110-021)

108.Chun-Huei Tsau, Jien-Wei Yeh, and Jason Shian-ching Jang, "Mechanical Behaviors of Chromium or Niobium-Modified Ni47.5Al 25Fe27.5 Alloy at Elevated Temperature," Metallurgical and Materials Transaction A, vol. 37A, pp. 175-184, 2006.01. SCI, Subject Categories: Metallurgy & Metallurgical Engineering.

109.J. S. C. Jang, L. J. Chang, G. J. Chen, and J. C. Huang, "Crystallization Behavior of the Zr63Al7.5Cu17.5Ni10B2 Amorphous Alloy," Intermetallics, vol. 13, pp. 907-911, 2005.07. SCI, Impact Factor: 2.219, Rank Factor: 3/65, Subject Categories: Metallurgy & Metallurgical Engineering, (NSC92-2216-E-214-015 and NSC93-2216-E-214-001)

110.M. L. Ted Guo, Chi Y. A. Tsao, J. C. Huang, J. S. C. Jang, "Crystallization behavior of spray-formed and melt-spun Al89La6Ni5 hybrid composites with amorphous and nanostructured phases," Materials Science and Engineering A, vol. 404, pp. 49-56, 2005.07, SCI, Subject Categories: Materials Science, Multidisciplinary, (NSC93-2216-E-110-021)

111.P. J. Hsieh, J. C. Huang, J. S. C. Jang, and C. Y. A. Tsao, "Transformation between nanocrystalline and amorphous phases in Zr-X alloys during accumulative roll bonding," J. of Metastable and Nanostructured Materials, vol. 24-25, pp. 351-354, 2005.06. EI (NSC93-2216-E-110-021)

112.J. S. C. Jang, S. C. Lu, L. J. Chang, T. H. Hung, J. C. Huang, and C. Y. A. Tsao, "Crystallization and Thermal Properties of Zr-Al-Cu-Ni BasedAmorphous Alloy Added with Boron and Silicon," J. of Metastable and Nanostructured Materials, vol. 24-25, pp. 201-204, 2005.06. EI, (NSC93-2216-E-214-002, NSC93-2216-E-214-008)

113.J. S. C. Jang, K. H. Liu, S. F. Tsao, L. J. Chang, J. C. Fwu, C. T. Hsu, and K. H. Tseng, "Nano-Scaled Microstructure Evolution of W-Ni-Fe-Co Heavy Alloy by Mechanical Alloying," J. of Metastable and Nanostructured Materials, vol. 24-25, pp. 133-136, 2005.06, EI, (NSC94-2623-7-214-001)

114.Jason S. C. Jang, Y. W. Chen, L. J. Chang, H. Z. Cheng, J. C. Huang, and C. A. Tsao, "Crystallization and Fracture Behavior of The Zr65-xAl7.5Cu17.5Ni10Six Bulk Amorphous Alloys," J. of Materials Chemistry and Physics, vol. 89, no. 1, pp. 122-129, 2005. 01, SCI, Subject Categories: Materials Science, Multidisciplinary, (NSC93-2216-E-214-002, NSC93-2216-E-214-008)

115.P. J. Hsieh, J. C. Huang, Y. P. Hung, S. I. Chou, and J. S. C. Jang, "Characterization on Nanocrystallization and Amorphization Evolution in Zr-X Alloys During ARB Process," Materials Chemistry and Physics, vol. 88, no. 2-3, pp. 364-376, 2004.12. SCI, Subject Categories: Materials Science, Multidisciplinary

116.J. S. C. Jang, Y. W. Chen, L. J. Chang, and G. J. Chen, "Crystallization Behavior of the Zr61Al7.5Cu17.5Ni10Si4 Bulk Amorphous Alloy," J. of Materials Chemistry and Physics, vol. 88, no. 2-3, pp. 227-233, 2004.11. SCI, Subject Categories: Materials Science, Multidisciplinary.

117.Jason S. C. Jang, T. H. Hung, and L. J. Chang, "The Effect of Boron on the Thermal Properties of the Zirconium-based Bulk Amorphous Alloys," Materials Science and Engineering A, vol. A375-377, pp. 307-311, 2004.08, SCI, Subject Categories: Materials Science, Multidisciplinary

118.Jason S. C. Jang*, H. R. Wong, L. J. Chang, and S. J. Wong, "Effects of Environment and Temperature on The Mechanical Behavior of The Ni-19Si-3Nb Intermetallic Alloy Doped With Boron and Carbon" Intermetallics, vol. 12, pp. 945-950, 2004.07. SCI, Impact Factor: 2.219, Rank Factor: 3/65, Subject Categories: Metallurgy & Metallurgical Engineering.

119.J. S. C. Jang*, S. P. Cheng, J. C. Fwu, and L. J. Chang, "Effects of Environment and Temperature on The Mechanical Behavior of The Ni-19Si-3Nb-0.15B Based Intermetallic Alloy with Chromium addition,," J. of Materials Chemistry and Physics, vol. 85, pp. 294-301., 2004.06. SCI, Subject Categories: Materials Science, Multidisciplinary

120.J. S. C. Jang* and H. P. Shih, "Microstructure Evolution of AISI 304 Stainless Steel Joint Brazed by Mechanical Alloyed Nickel Base Filler with Different Silicon Content," J. of Materials Science Letter, vol. 22, pp. 79-82, 2003.10. SCI, Subject Categories: Materials Science, Multidisciplinary

121.J. S. C. Jang* and L. J. Chang, "The Effect of Heat Treatment on the Microstructure Change and Mechanical properties For the Ni-19Si-3Nb-0.15B Intermetallic Alloy," J. of Materials Chemistry and Physics, vol. 82, pp. 128-133., 2003.10. SCI, Subject Categories: Materials Science, Multidisciplinary

122.Jason S. C. Jang*, L. J. Chang, Y. T. Jiang, and P. W. Wong, "Crystallization Behavior and the Thermal Properties of Zr63Al7.5Cu17.5Ni10B2 Bulk Amorphous Alloy," Materials Science Forum, vol. 426-432, pp. 1867-1872, 2003.07, SCI, Subject Categories: Materials Science, Multidisciplinary

123.Jason S. C. Jang*, M. T. Chen, Y. W. Chen, M. C. Yea, S. T. Chung, and Weite Wu, "Effect of Silicon on the Thermal Properties of the Zirconium-based Bulk Amorphous Alloys," Materials Science Forum, vol. 426-432, pp. 1879-1884, 2003.07, SCI, Subject Categories: Materials Science, Multidisciplinary

124.J. S. C. Jang* and H. P. Shih, "Microstructure Evolution of AISI 304 Stainless Steel Joint Brazed by Mechanical Alloyed Nickel Base Filler with Different Silicon Content," J. of Materials Science Letter, vol. 22, pp. 79-82, 2003.03. SCI, Subject Categories: Materials Science, Multidisciplinary

125.J. S. C. Jang* and L. J. Chang, "Effect of Boron and Carbon on the Precipitate Microstructure and Mechanical Behavior of the Ni-19-Si-3 Nb Based Alloys," Intermetallics, vol. 10, pp. 967-977, 2002.10. SCI. Impact Factor: 2.219, Rank Factor: 3/65, Subject Categories: Metallurgy & Metallurgical Engineering,

126.J. S. C. Jang*, C. J. Ou, and C. Y. Cheng, "The Evolution of Microstructure Change and Mechanical Properties for A Nickel Silicide Based Alloy Doped With Carbon and Boron," J. of Materials Science and Engineering, vol. A329-331C, pp. 453-458, 2002.06. SCI, Subject Categories: Materials Science, Multidisciplinary

127.J. S. C. Jang*, C. Y. Cheng, and S. K. Wong, "The Effect of Carbon Microalloying on the Microstructure and Mechanical Properties of a Nickel based Alloy," J. of Materials Chemistry and Physics, vol. 72, pp. 66-71, 2001.10. SCI, Subject Categories: Materials Science, Multidisciplinary

128.J. S. C. Jang* and H. P. Shih, "Study of the nano-structured nickel-based brazing filler synthesized by mechanical alloying," J. of Materials Chemistry and Physics, vol. 70, pp. 217-222, 2001.05. SCI, Subject Categories: Materials Science, Multidisciplinary

129.Chun-Huei Tsau, Jien-Wei Yeh, Jason Shian-Ching Jang, Hong-Jen Lai, "Microstructures and Mechanical Properties of Ni-Al-Fe-X Intermetallics Based on Ni-25Al-27.5Fe alloy," J. of Materials Chemistry and Physics, vol. 65, pp. 136-143, 2000.10. SCI,  Subject Categories: Materials Science, Multidisciplinary

130.J. S. C. Jang*, S. K. Wong, and P. Y. Lee, "The Effect of Boron on the Microstructure and Mechanical Behavior of An Ni-19Si-3Nb Based Alloy," J. of Materials Science and Engineering, vol. A281, pp. 17-22, 2000.03. SCI, Subject Categories: Materials Science, Multidisciplinary

131.Chih-Chao Yang, Jason S. C. Jang, Edward Chang, "A Fabrication Process For Aluminum Alloys Reinforced With Al-Fe-V-Si Particles," J. of Materials and Manufacturing Engineering Processes, vol. 111, pp. 153-163, 1999.11. SCI

132.J. S. C. Jang*, C. H. Tsau, W. D. Chen, P. Y. Lee, "Microstructure Evolution of Mechanical Alloys Ni-24 at. %Si," J. of Materials Science, vol. 33, pp. 265-270, 1998.01. SCI, Subject Categories: Materials Science, Multidisciplinary

133.Chun-Huei Tsau, Jason Shian-Ching Jang, "The Effect of Niobium Additions on the Microstructures and Mechanical Properties of Ni-25Al-27.5Fe Intermetallics," Intermetallics, vol. 5, pp. 433-441, 1997.11. SCI, Impact Factor: 2.219, Rank Factor: 3/65, Subject Categories: Metallurgy & Metallurgical Engineering,

134.J. D. Hwang, H. J. Lin, J. S. C. Jang, W. S. Hwang, C. T. Hu, "Relationship Between Flow Characteristics and Surface Quality in Inclined Twin Roll Strip Casting," ISIJ International, vol. 36, pp. 690-699, 1996.01, SCI, Subject Categories: Metallurgy & Metallurgical Engineering,

135.Chun-Huei Tsau, Jason Shian-Ching Jang, Jien-Wei Yeh, "Microstructure Investigation in B2-phased Ni-25Al-40-Fe Intermetallic Compound," Scripta Materialia, vol. 34, pp. 325-330, 1996.01. SCI, Subject Categories: Metallurgy & Metallurgical Engineering

136.Chun-Huei Tsau, Jason Shian-Ching Jang, Jien-Wei Yeh, "The Effect of Chromium Additions on the Mechanical Properties of Ni-25-Al-27.5Fe Based Intermetallic Compounds," J. of Materials Science and Engineering, vol. A192/193, 1995.01. SCI, Subject Categories: Materials Science, Multidisciplinary

137.M. S. Leu, W. K. Wang, S. C. Jang, "An investigation of Magnetic Properties of Fe73.5Cu1Nb3Si13.5B9 Alloys," J. of Materials Science and Engineering, vol. A181/A182, pp. 997-1000, 1994.01. SCI, Subject Categories: Materials Science, Multidisciplinary

138.S. U. Jen, Y. Y. Chen, J. S. C. Jang, C. H. Tsau, "How Would Silicon Affect Magnetic and Transport Properties of (Fe-V)80(B,Si)20 glasses," J. of Magnetism and Magnetic Materials, vol. 125, pp. 315-318, 1993.01. SCI

139.J. S. C. Jang, C. H. Tsau, "Disordering of the Ni3Si Intermetallic Compound by Mechanicl Milling," J. of Materials Science, vol. 28, pp. 982-988, 1993.01. 國際期刊 SCI, Subject Categories: Materials Science, Multidisciplinary

140.C. H. Tsau, J. S. C. Jang, J. W. Yeh, "Microstructures and MechanicalBehaviors of Ni-Al-Fe Intermetallic Compounds," J. of Materials Science and Engineering, vol. A152, pp. 264-268, 1992.01. SCI

141.J. S. C. Jang, C. H. Tsau, "The Effect of Nb Additions On The Fracture of A Ni3Si Based Alloy," J. of Materials Science and Engineering, vol. A153, pp. 525-531, 1992.01, SCI

142.D. Turnbull, J. S. C. Jang, C. C. Koch, "Model For Melting Enthalpy of Sn In Ge-Sn Composites," J. of Mater. Research, vol. 5, pp. 1731-1732, 1990.02. SCI

143.J. S. C. Jang, C. C. Koch, "Amorphization and Disordering of the Nickel Aluminide by Mechanical Alloying," J. of Materials Research, vol. 5, pp. 498-510, 1990.01. SCI

144.J. S. C. Jang, C. C. Koch, "Melting and Possible Amorphization of Sn and Pb in Ge/Sn and Ge/Pb Mechanically Milled Powders," J. of Materials Research, vol. 5, pp. 325-333, 1990.01
SCI

145.J. S. C. Jang, C. C.Koch, "The Hall-Petch Relationship in Crystalline Iron Produced by Ball Milling," Scripta Metallurgia, vol. 24, pp. 1599-1604, 1990.01. SCI

146.C. C. Koch, J. S. C. Jang, and S. S. Gross, "The Melting Point Depression of Tin in Mechanically Milled Tin and Germanium Powder Mixture," J. of Materials Research, vol. 4, pp. 557-564, 1989.05. SCI

147.J. S. C. Jang and C. C. Koch, "The Hall-Petch Relationships in Mechanically Alloyed Ni3Al with Oxide Dispersoids," Scripta Metallurgica, vol. 22, pp. 677-682, 1988.11. SCI

148.J. S. C. Jang, S. G. Donnelly, P. Godvarti, and C. C. Koch, " Microstructures and Mechanical Behavior of Mechanically alloyed Nickel Aluminide," International Journal of Powder Metallurgy, vol. 24, no. 4, pp. 315-325, 1988.10. SCI

149.Y. Lee, J. S. C. Jang, and C. C. Koch, "Amorphization by Mechanical Alloying: The Role of Mixtures of Intermetallics," Journal of the Less-Common Metals, vol. 140, pp. 73-83, 1988.07. SCI

期刊論文(國內):

1.朱繼文、 邱松茂、 鄭憲清、 楊國源、 莊道良, "Development of LED packaging transparent thin film with moisture barrier and electrical conduction characteristics," 機械工業, vol. 313, no. 4, pp. 110-117, 2009.04.

2.洪佳博、彭宗平、鄭憲清、吳建國,”Mg65Ni25Nd6Gd4合金之儲氫性能研究”,粉末合金會刊, Vol. 34, No. 2, pp. 119-125 (2009).

3.鄭憲清、王怡華、張量然、張鈞富、黃宥棋、蕭証文, 2006, Zr60Al7.5 Cu17.5Ni10Si4B1 非晶質合金結晶行為及熱穩定性之探討, 材料科學與工程, vol.38, no.3, pp.169-174, 2006.09

4.陳泊豪、蔡政偉、楊博丞、鄭憲請，2004， 添加鉻對不同銀含量之鎳矽基介金屬合金顯微結構之影響，鑄造工程學刋, 30-2, 1-7.

5.鄭憲清、石鴻斌，2004, 機械合金法合成奈米結構鎳基硬銲填料之研究，銲接與切割，14-3, 43-47

6.Jason S. C. Jang, Y. W. Chen, M. C. Yah, Thermal Properties of Zr61Al7.5Cu17.5Ni10Si4Bulk Amorphous Alloy, 鑄造工程學刋, 29-4 (2003) 22-29.

7.Jason S. C. Jang, L. J. Chang, Y. T. Jiang, T. F. Huang, and P. W. Wong, Study of The Thermal Properties of Zr61Al7.5Cu17.5Ni10B4Bulk Amorphous Alloy, 鑄造工程學刋, 29-3 (2003) 18-24.

8.Jason S. C. Jang, T. H. Hong, and L. J. Chang, Crystallization Behavior of A ZrAlCuNi Bulk Amorphous Doped With Boron, 材料科學與工程, 35-3 (2003) 182-186.

9.J. S. C. Jang, H. P. Shih, and L. J. Chang, 2002, Study of the Nanostructures for Nickel-Based Brazing Filler Synthesized by Mechanical Alloying, J銲接與切割., 12-4, 49-53.

10.J. S. C. Jang and S. K. Wong, 1998, The Effect of Boron on the Microstructure and Mechanical Properties of An Ni-19Si-3-Nb-xB Based alloy, 義守大學學報 (台灣、高雄縣), 第五期, p. 101-108.

11.S. C. Jang, 1984, Study on the Manufacture of HS-36 Cobalt Base Alloy for Spot Welder Parts, CHUKUNG, Journal of the Foundry Industry in Taiwan, R.O.C., 42 (1984) 35-39.

12.K. H. Yang, S. C. Jang, M. J. Jean, and G. C. Yang, 1983, Study on the Application of the No-Bake Molding Process for Manufacturing the Precision Machine Tool Castings, CHUKUNG, Journal of the Foundry Industry in Taiwan, R.O.C., 38 (1983) 10-18.

13.K. H. Yang, S. C. Jang, M. J. Jean, and G. C. Yang, 1982, Study on the Manufacture of Wear Resistant Machine Tool Castings, CHUKUNG, Journal of the Foundry Industry in Taiwan, R.O.C., 34 (1982) 10-14.

研討會論文:

1.P. H. Tsai, Y. Z. Lin, J. B. Li, J. S. C. Jang, S. R. Jian, C Li, and J. P. Chu, Application of Zr-base metallic glass and metallic glass thin film coating on the surgical blade, TACT 2011 International Thin Film Conference (Kenting, Taiwan, November 20-23, 2011).

2.J. S. C. Jang, J. B. Li, Z. W. Hsiao, J. C. Huang, Enhanced Remarkable Plasticity of Zr-based ex-situ Ta Dispersoids, 12th IUMRS International Conference in Asia, Taipei, Taiwan, September 19-22, 2011. Paper ID:0063.

3.Y. C. Chen, J. P. Chu, J. S. C. Jang, T. R. Tsai, H. Sung, H. Kato, Evalution of Physical and Mechanical Properties of Metallic Glasses in Micro/nano Scales, 12th IUMRS International Conference in Asia, Taipei, Taiwan, September 19-22, 2011. Paper ID:0063.

4.K. C. Wu, P. J. Hsieh, P. H. Tsai, J. B. Li, Jason S. C. Jang, Microstructure Evolution of Ni-free Zr-base BMG, 12th IUMRS International Conference in Asia, Taipei, Taiwan, September 19-22, 2011. Paper ID:0394.

5.Y. Z. Lin, P. H. Tsai, J. B. Li, P. C. Wong, Jason S. C. Jang, Zr-based Bulk metallic Glass as Surgical Blade, 12th IUMRS International Conference in Asia, Taipei, Taiwan, September 19-22, 2011. Paper ID:0397.

6.J. B. Li, H. Z. Zhang, J. S. C. Jang, S. R. Jian, C. Li, J. C. Huang, and T. G. Nieh, Viscous Flow and Thermoplastic Forming Ability of a Zr-based Bulk Metallic Glass Composite with Ta Dispersoids, ISMANAM 2011, 18th International Symposium on Metastable, Amorphous and Nanostructured Materials, Gijon, Spain, June 26 - July 1st, 2011,國際性研討會(NSC98-2221- E-008-116-MY3)

7.J. B. Li, Y. Z. Chang, J. S. C. Jang, C. Li, S.R. Jian, P. H. Tsai, K. C. Wu, J. D. Hwang, J. C. Huang, and T. G. Nieh, Remarkable Plasticity Enhancement of ZrCu-Based Bulk Metallic Glass by in-situ and ex-situ Dispersed Ta Particles, The 8th International Conference on Bulk Metallic Glasses (BMG 8), Hong Kong, May 15-19, 2011. 國際性研討會 (NSC98-2221-E-008-116 -MY3)

8.J. S. C. Jang, J. B. Li, S. L. Lee, Y. S. Chang, S. R. Jian, J. C. Huang, and T. G. Nieh, Prominent plasticity of Mg-based bulk metallic glass composites by ex-situ spherical Ti particles. The 8th International Conference on Bulk Metallic Glasses (BMG 8), Hong Kong, May 15-19, 2011. 國際性研討會 ( NSC98-2221-E-008-116 -MY3)

9.P. H. Tsai, H. C. Lin, S. R. Jian, J. S. C. Jang, J. B. Li, C. C. Fu, C. Li, Y. Z. Lin, and H. Z. Zhang, Effect of Microalloying of Si On the Thermal and Mechanical Properties of A Ti-Based Bulk Metallic Glass, The 8th International Conference on Bulk Metallic Glasses (BMG 8), Hong Kong, May 15-19, 2011. 國際性研討會 (NSC98-2221-E-008-116 -MY3)

10.Guo-Ju Chen, Sheng-Rui Jian, Jason S.-C. Jang, Jenh-Yih Juang, and Yi-Shao Lai, Microstructural, magnetic and mechanical properties of CoFeZrB thin films, The 8th International Conference on Bulk Metallic Glasses (BMG 8), Hong Kong, May 15-19, 2011. 國際性研討會.

11.J. S. C. Jang, J. C. Huang, and Chi. Y. A. Tsao, Design and Fabrication of Mg-based Bulk Metallic Glass Composites (BMGCs) with Ultra High Toughness The 5th Pan-Yellow Sea Rim (YSR5) International Symposium on Magnesium Alloys in Taipei, November 16~18, 2010, 國際性研討會

12.李嘉彬, 賴昶存, 簡賸瑞, 鄭憲清, 蔡佩樺, 林雨澤, 超高韌性銅基塊狀非晶質合金複材製備及其機械性質之研究, 2010年中國材料科學學會年會暨論文發表會,義守大學高雄,11/19-20, 2010,全國性研討會(NSC98-2221- E-008-116-MY3)

13.鄭憲清, 李宗雄, 張詠尚, 蔡佩樺, 李嘉彬, 吳觀竹, 張益綜, 超高強度鎂基塊狀非晶質迷你齒輪的製備, 2010年中國材料科學學會年會暨論文發表會,義守大學高雄,11/19-20, 2010,全國性研討會(NSC98-2221- E-008-116-MY3)

14.鄭憲清 ,林泓成,蔡佩樺,李嘉彬,張漢宗, 吳觀竹, 添加微量Si對Ti40Zr10Cu36Pd14塊狀非晶質合金玻璃形成能力與熱穩定性影響之研究. 2010年中國材料科學學會年會暨論文發表會,義守大學高雄,11/19-20, 2010,全國性研討會(NSC98-2221- E-008-116-MY3)

15.吳觀竹, 謝佩汝, 鄭憲清, 簡賸瑞, 李嘉彬, 蔡佩樺, 李宗雄, 楊宣郁, “ 具高塑性之無鎳鋯基塊狀非晶質合金Zr-Cu-Pd-Nb-Al之研究”, 2010年中國材料科學學會年會暨論文發表會,義守大學高雄,11/19-20, 2010, 全國性研討會 (NSC95-2221-E-214-015 and NSC98-2221-E-008-116-MY3)

16.S. K. Wang, C. C. Fu, Z. W. Cai, S. R. Jian, J. S. C. Jang*, H. Z. Zhang, H. C. Hsu, Microstructure and Room Temperature Mechanical Properties of The Ni3Si -based Alloy with Titanium Addition, The 6th International Conference of Advanced Matreials and Processing (ICAMP 6), Lijiang, China, July 19-24, 2010, 國際性研討會.

17.P. H. Tsai, S. K. Wang, S. R. Jian, I. S. Lee, Y. Z. Chang, Y. Z. Lin, J. S. C. Jang*, C. Li, Effect of Partial Crystallization On The Mechanical Properties of (Cu42Zr42Al8Ag8)99.5Si0.5 Bulk Metallic Glass, The 6th International Conference of Advanced Matreials and Processing (ICAMP 6), Lijiang, China, July 19-24, 2010, 國際性研討會.

18.Pai-Tsung Chiang, Guo-Ju Chen, Sheng-Rui Jian, Yung-Hui Shih, Jason Shian-Ching Jang, Effects of the buffer layers on the adhesion and antimicrobial properties of the amorphous ZrAlNiCuSi films, The 6th International Conference of Advanced Matreials and Processing (ICAMP 6), Lijiang, China, July 19-24, 2010, 國際性研討會.

19.Jason S. C. Jang, K. C. Wu, S. R. Jian, P. J. Hsieh, J. C. Huang, and C. T. Liu, A Ni-free Zr-Based Bulk Metallic Glass With Remarkable Plasticity, ISMANAM 2010, 17th International Symposium on Metastable, Amorphous and Nanostructured Materials, Zurich, Swiss, July 4-9, 2010,國際性研討會(NSC98-2221- E-008-116-MY3)

20.J. S. C. Jang, T. H. Li, S. R. Jian, J. C. Huang, and T. G. Nieh, Confinement Zone Size Effect of Dispersoids on Plasticity of Mg-Based Bulk Metallic Glass Composites, ISMANAM 2010, 17th International Symposium on Metastable, Amorphous and Nanostructured Materials, Zurich, Swiss, July 4-9, 2010,國際性研討會(NSC96-2218-E-110-001, NSC98-2221- E-008-116-MY3)

21.鄭憲清, 張詠尚,李宗雄, " Remarkable Plasticity improvement of Mg58Cu28.5Gd11Ag2.5 Based Bulk Metallic Glass Composites With Ti Particles," The 2009 Annual Conference of The Chinese Society For Materials Science, 國立東華大學, Hualian, Taiwan, 2009.11, 全國性研討會(NSC95-2221-214-015-MY3, NSC96-2218-E-110-001, NSC98-2221- E-008-116-MY3)

22.李嘉彬, 吳芫豪, 簡賸瑞, 鄭憲清, 添加微量Ta對銅基塊狀非晶質合金之機械性質及微觀結構探討, The 2009 Annual Conference of The Chinese Society For Materials Science, 國立東華大學, Hualian, Taiwan, 2009.11, 全國性研討會(NSC95-2221-214-015-MY3, NSC96-2218-E-110-001, NSC98-2221-E-008-116-MY3)

23.Z. W. Hsiao, P. H. Tsai, K. T. Hsu, Y. M. Hsu, J. S. C. Jang, THE MECHANICAL PROPERTIES OF THE NANO-CRYSTALLIZED Zr-BASE BULK METALLIC GLASS, The 2009 Annual Conference of The Chinese Society For Materials Science, 國立東華大學, Hwalian, Taiwan, 2009.11, 20-21, 全國性研討會(NSC95-2221-214-015-MY3, NSC96-2218-E-110-001, NSC98-2221-E-008-116-MY3)

24.鄭憲清, 李宗雄, 林泓成, 陳政文, 超高比強度鎂基塊狀非晶質迷你精密齒輪的製備, The 2009 Annual Conference of The Chinese Society For Materials Science, 國立東華大學, Hwalian, Taiwan, 2009.11, 20-21, 全國性研討會(NSC95-2221-214-015-MY3, NSC96-2218-E-110-001, NSC98-2221-E-008-116-MY3)

25.C. J. Lee (李敬仁), Y. H. Lai (賴炎暉), Y. C. Chang (張育誠), C. W. Tang (湯鎮偉) , J. C. Huang (黃志青), Jason S. C. Jang (鄭憲清), Size effect of Au based metallic glass micro-pillars at elevated temperatures, The 2009 Annual Conference of The Chinese Society For Materials Science, 國立東華大學, Hwalian, Taiwan, 2009.11, 全國性研討會(NSC95-2221-214-015-MY3, NSC96-2218-E-110-001, NSC98-2221-E-008-116-MY3)

26.Pai-Tsung Chiang, Guo-Ju Chen, Sheng-Rui Jian, Yung-Hui Shih, Jason Shian-Ching Jang, Hsien-Wei Chen, Effects of the buffer layers on the adhesion and antimicrobial properties of the amorphous Zr-Al-Ni-Cu-Si films, TACT 2009 International Thin Film Conference (Taipei, December 14-16, 2009).

27.Sheng-Rui Jian, Guo-Ju Chen, Hou-Guang Chen, Jason Shian-Ching Jang, and Hui-Ling Kao, Mechanical deformation mechanisms in AlN thin films by Berkovich nanoindentation, TACT 2009 International Thin Film Conference (Taipei, December 14-16, 2009).

28.J. S. C. Jang, W. J. Li, T. H. Li, S. R. Jian, J. C. Huang, T. G. Nieh, Thermoplastic Forming Ability of A Mg-base Bulk Metallic Glass Composites Reinforced With Porous Mo Particles, The 7th International Conference on Bulk Metallic Glasses (BMG 7), Busan, Korea, October 1-5, 2009. 國際性研討會 (NSC95-2221-E-214-015-MY3, NSC98-2221-E-008-116 -MY3)

29.Y.H. Lai, H.M. Chen, C.J. Lee, J.C. Huang and J.S.C. Jang, Strain burst speeds in metallic glass micropillars, The 7th International Conference on Bulk Metallic Glasses (BMG 7), Busan, Korea, October 1-5, 2009. 國際性研討會 (NSC95-2221-E-214-015-MY3, NSC98-2221-E-008-116 -MY3)

30.K.-W. Chen, S.-R. Jian, Jason S.-C. Jang, J.-F, Lin, The study of loading rate effect of a Mg-based bulk metallic glass during nanoindentation, The 7th International Conference on Bulk Metallic Glasses (BMG 7), Busan, Korea, October 1-5, 2009. 國際性研討會 (NSC95-2221-E-214-015-MY3, NSC98-2221-E-008-116 -MY3)

31.P. H. Tsai, I. S. Huang, T. H. Li, I. S. Lee, J. S. C. Jang, J. C. Huang, K. C. Hsieh, “CRYSTALLIZATION BEHAVIOR AND THERMAL STABILITY OF TWO-GLASSY PHASE ZR-BASED BULK METALLIC GLASSES”, THERMEC 2009, Berlin, Germany, 2009. 08, 25-29,國際性研討會 , NSC95-2221-E-214-015-MY3, NSC 98-2221-E-008 -116 -MY3.

32.Z. W. Hsiao, C. C. Fu, P. H. Tsai, J. S. C. Jang, S. R. Jian. J. C. Huang, “EFFECT OF NANO-CRYSTALLIZATION ON THE MECHANICAL PROPERTIES OF THE (Zr53Cu30Ni9Al8)99.5Si0.5 BULK METALLIC GLASS”, THERMEC 2009, Berlin, Germany, 2009. 08, 25-29,國際性研討會 , NSC95-2221-E-214-015-MY3, NSC 98-2221-E-008 -116 -MY3.

33.N. Y. Wu, C. J. Hsieh, Jason S. C. Jang, S. R Jian, Y. T. Chen, “Thermal and mechanical properties of the (Cu36Zr48Al8Ag8)100-xSix (x = 0–1) amorphous alloys”, THERMEC 2009, Berlin, Germany, 2009. 08, 25-29,國際性研討會, NSC95-2221-E-214-015-MY3, NSC 98-2221-E-008 -116 -MY3.

34.J. S. C. Jang, D. J. Pan, S. R. Jian, Y. H. Wu, J. C. Huang, T. G. Nieh, "Thermal and Mechanical Properties of The Zr-based Bulk Metallic Glass Composites With Ductile In-situ Dispersed Ta-rich particles," ISMANAM 2009, 16th International Symposium on Metastable,Amorphous and Nanostructured Materials, Beijing, China, 2009.07
國際性研討會 , NSC95-2221-E-214-015-MY3

35.J. S. C. Jang, I. S. Lee, T. H. Li, , S. R. Jian, J. C. Huang, "Mechanical Properties of The Partially Nano-Crystallized (Cu42Zr42Al8Ag8)99.5Si0.5 Bulk Metallic Glass," Proceeding of the 16th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2009), Beijing, China, 2009.07, 國際性研討會

36.J. S. C. Jang, Y. S. Chang, T. H. Li, P. J. Hsieh, J. C. Huang, Chi. Y. A. Tsao, "Plasticity Enhancement of Mg58Cu28.5Gd11Ag2.5 Based Bulk Metallic Glass Composites Dispersion Strengthened by Ti Particles," the 16th International Symposium on Metastable, Amorphous and Nanostructured Materials (ISMANAM 2009), Beijing, China, 2009.07, 國際性研討會

37.Bing-Ming Lin, Shiow-Huey Suen, Jason Shian-Ching Jang, "Promotion Strategy of Electric Scooters in Taiwan," EVS24, The 24th International Electric Vehucle Symposium, Stavanger, Norway, 2009.05, 國際性研討會

38.蕭証文,鄭憲清,黃宥祺,蔡佩樺,吳觀竹,探討塊狀非晶質(Zr53Cu30Ni9Al8)99.5Si0.5 不同結晶率對機械性質影響之研究, 中國材料科學學會年會, P08-087, 2008年11月21-22日, 臺北科技大學, 臺北市. 全國性研討會

39.邱家宇,鄭憲清,李威錚,黃志青,含多孔性鉬延性金屬顆粒Mg58Cu28.5Gd11Ag2.5 非晶質複合合金機械性質及其微結構之研究, 中國材料科學學會年會, P08-134, 2008年11月21-22日, 臺北科技大學, 臺北市. 全國性研討會

40.鄭憲清,黃宥祺,李宗雄,李易遂,張量然,Thermal Plastic Deformation of A Zr-base Bulk Metallic Glasses, 中國材料科學學會年會, P08-050, 2008年11月21-22日, 臺北科技大學, 臺北市. 全國性研討會

41.J. S. C. Jang (鄭憲清), Y. C. Huang (黃宥棋), C. H. Lee (李宗雄), I. S. Lee (李易遂), and L. J. Chang (張量然), 添加微量矽對銅基塊狀非晶質合金之機械性質及微觀結構探討, 中國材料科學學會年會, P08-051, 2008年11月21-22日, 臺北科技大學, 臺北市. 全國性研討會

42.鄭憲清,李宗雄,張詠尚,柴世融,吳觀竹,添加延性金屬顆粒來改善鎂基塊狀非晶質合金韌性之研究, 中國材料科學學會年會, P08-106, 2008年11月21-22日, 臺北科技大學, 臺北市. 全國性研討會

43.洪佳博,彭宗平,鄭憲清,吳建國,”Mg65Ni25Nd6Gd4合金之儲氫性能研究”,中國材料科學學會年會, P01-109, 2008年11月21-22日, 臺北科技大學, 臺北市.

44.C. C. Fu, J. S. C. Jang, I. S. Lee, P. H. Chen, L. J. Chang, H. S. Wang, " Strain Rate Dependence on the High Temperature Mechanical Behavior of The Ni-18Si-3.0Nb-1.0Cr-0.2B Intermetallic Alloy," The 5th International Conference of Advanced Matreials and Processing, Harbin, China, 2008.09, 國際性研討會

45.Chih-Chiang Fu, Jason Shian-Ching Jang, Han-Chang Tsai, Tsung-hsiung Li, "EVOLUTION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE Ni-25Al-27.5Fe-1.0Nb INTERMETALLIC ALLOY AFTER THERMAL MECHANICAL TREATMENT," The 5th International Conference on Advance Materials and Processing, Harbin, China, 2008.09. 國際性研討會

46.SHENG-RUI JIAN, JASON SHIAN-CHING JANG, GUO-JU CHEN, HOU-GUANG CHEN, YUAN-TSUNG CHEN, CHUN-LIANG CHEN, "Structural and nanomechanical properties of a-plane ZnO thin films," The 5th International Conference of Advanced Matreials and Processing, Harbin, China, 2008.09. 國際性研討會

47.Huei-Sen Wang, Shian-Ching Jang, Hou-Guang Chen, Huang Chih Ying, "Joining of Zr53Cu30Ni9Al8 Bulk Metallic Glass Using Pulsed Nd:YAG Laser Welding," The 5th International Conference of Advanced Matreials and Processing,, Harbin, China, 2008.09, 國際性研討會

48.G. J. Chen, Y. H. Shih, J.S.C. Jang, S. R. Jian, W. C. Chang, J.C.A. Huang, "Magnetic properties, nanostructure and ordering kinetics of FePtCu thin films," The 5th International Conference of Advanced Matreials and Processing, Harbin, China, 2008.09, 國際性研討會

49.P.T. Chiang, S.W. Chen, J.S.C. Jang, G.J. Chen, Y.H. Shih, S.R. Jian, P.H. Tsai, "Property Improvement of Antimicrobial ZrAlNiCuSi Thin Film By Buffer-Layer Coating," Thin Film 2008, Singapore, 2008.07,國際性研討會

50.C. W. Chu, Jason S. C. Jang, S. M. Chiu, J. P. Chu, "Study of The Characteristics and Corrosion Behavior For The Zr-Based Metallic GlassThin Film Fabricated by Pulse Magnetron Sputtering Process," Thin Film 2008, Singapore, 2008.07, 國際性研討會

51.P.T. Chiang, S.W. Chen, J.S.C. Jang, G.J. Chen, Y.H. Shih, H.H. Liu, T. Y. Wu, "Environmental Surface Owning Passively Antimicrobial Mechanism with Amorphous ZrAlNiCuSi Thin Film," Thin Film 2008, Singapore, 2008.07, 國際性研討會, ISU97-07-01, ISU97-07-01-01

52.J. C. Huang, X. H. Du, J. S. C. Jang, K. C. Hsieh, P. K. Liaw, "On the toughening of bulk metallic glasses," The Sixth International Conference on Bulk Metallic Glasses (BMG VI), Xi'an, China, 2008.05, 國際性研討會 , NSC96-2218-E-110-006

53.J. P. Chu, Y. C. Chen, T. Y. Lin, C. W. Wu, J. S. C. Jang, "SUPERPLASTIC NANO/MICROFORMING OF BULK METALLIC GLASSES IN AIR," The Sixth International Conference on Bulk Metallic Glasses (BMG VI), Xi'an, China, 2008.05
國際性研討會 , NSC96-2218-E-110-006

54.J. S. C. Jang, C. H. Lee1, L. J. Chang, P. H. Tsai, K.R. Lee, J. C. Huang, and Chi Y. A. Tsao, "Plasticity Enhancement of Mg Bulk Metallic Glass," The 7th International Workshopon Advanced Intermetallics and Metallic Materials, Harbin, Heilongjiang, China, 2008.05
國際性研討會 , NSC95-2221-E-214-015-MY3

55.C. C. Fu, Y. C. Huang , I. S. Lee, P. H. Tsai, J. S. C. Jang, L. J. Chang, K. J. Lee, J. C. Huang, "Mechanical Properties of A Cu-Based Bulk Metallic Glass," The 6th International Conference on Bulk Metallic Glasses (BMG VI), Xi'an, China, 2008.05
國際性研討會, NSC96-2218-E-110-001

56.Jason S. C. Jang, C. F. Chang, Y. C. Huang, J. C. Huang, C. T. Liu, "Thermal Plastic Deformation Behaviour of A Zr-base Bulk Metallic Glasses," The 6th International Conference on Bulk Metallic Glasses (BMG VI), Xi'an, China, 2008.05
國際性研討會, NSC96-2218-E-110-001

57.C. Chuang, P. K. Liaw, J.H. Huang, G.P. Yu, R. Yang, W. Dmowski, J.S.C. Jang, J.C. Huang, K.C. Hsieh, "Fatigue induced structure transformation in a Zr-based BMG at ambient temperature," The 6th International Conference on Bulk Metallic Glasses (BMG VI), Xi'an, China, 2008.05, 國際性研討會 NSC96-2218-E-110-001

58.Shang K. Fan, Chi Y. A. Tsao, J. C. Huang, J. S. C. Jang, "Synthesis and mechanical properties of Mg65Cu25Gd10 BMGs and Mg65Cu25Gd10/Zinc BMG composites via P/M route," The 6th International Conference on Bulk Metallic Glasses (BMG VI), Xi'an, China, 2008.05, 國際性研討會,多位作者, NSC-2218-E-110-001, NSC95-2221-E-214-015-MY3

59.X. Du, Jacob Huang, K. C. Hsieh, J. S. C. Jang, P. K. Liaw, "Two-Glassy Phase Bulk Metallic Glass with Remarkable," 2008 TMS Annual Meeting & Exhibition, New Orleans, LA, USA, 2008.03, 國際性研討會, NSC96-2218-E-110-006

60.J. S. C. Jang, C. T. Tseng, L. J. Chang, Y. C. Yeh, J. L. Jou, and J. C. Huang, "Thermoplastic forming properties and microreplication ability of," 2008 TMS Annual Meeting & Exhibition, New Orleans, LA, USA, 2008.03, 國際性研討會,多位作者NSC95-2221-E-214-015-MY3

61.C. C. Fu, C. M. Chung, L. J. Chang, C. F. Chang, and J. S. C. Jang, "1. Dependence of Strain Rate and Environment on the Mechanical Properties of the Ni-19Si-3Nb-1Cr-0.2B Intermetallic Alloy at High Temperature," The Sixth Pacific Rim International conference on Advanced Materials and Processing (PRICM 6), 濟州島, Korea, 2007.11, 國際性研討會, NSC93-2745-E-214-001

62.J. S. C. Jang, Y. C. Huang, C. H. Lee, I. S. Lee, and L. J. Chang, "GLASS FORMING ABILITY AND THERMAL PROPERTIES OF A Cu-BASED BULK METALLIC GLASS MICROALLOYED WITH SILICON," The Sixth Pacific Rim International conference on Advanced Materials and Processing (PRICM 6), 濟州島, Korea, 2007.11, 國際性研討會 , NSC95-2218-E-110-006

63.余俊儀，蔣百聰，朱繼文，林繡芳，鄭憲清，施永輝，陳國駒, "ZrAlNiCuSi薄膜之抗菌性質研究," The 2007 Annual Conference of The Chinese Society For Materials Science, 國立交通大學, Hsinchu, Taiwan, 2007.11, 全國性研討會

64.余俊儀、 蔣百聰、 朱繼文、 林繡芳、 鄭憲清、 施永輝、 陳國駒, "緩衝層對ZrAlNiCuSi薄膜之影響及抗菌機構," The 2007 Annual Conference of The Chinese Society For Materials Science, 國立交通大學, Hsinchu, Taiwan, 2007.11, 全國性研討會

65.杜興蒿、 黃志青、 謝克昌、 賴炎暉、 陳海明、 鄭憲清、 廖楷輝、 鄭宇庭, "Two-glassy-phase bulk metallic glass with remarkable plasticity," The 2007 Annual Conference of The Chinese Society For Materials Science, , 2007.11, 國立交通大學, Hsinchu, Taiwan, 2007.11, 全國性研討會 , NSC96-2218-E-110-006

66.曾慶聰、 李威錚、 李易遂、 李宗雄、 邱家宇、 鄭憲清, "添加稀土元素對鎂基非晶質合金的熱性質和玻璃形成能力之影響," The 2007 Annual Conference of The Chinese Society For Materials Science, 國立交通大學, Hsinchu, Taiwan, 2007.11, 全國性研討會 , NSC95-2221-E-214-015-MY3

67.林詩芹、 蘇筱君、 謝佩汝、 鄭憲清、 楊立誌, "添加Gd元素對Mg58Cu31Y11塊狀非金質合金之玻璃形成能力," The 2007 Annual Conference of The Chinese Society For Materials Science, 國立交通大學, Hsinchu, Taiwan, 2007.11
全國性研討會

68.李威錚、 鄭憲清、 邱家宇、 李易遂、 張詠尚、 黃志青, "添加延性金屬顆粒對鎂基塊狀非晶合金韌性影響之研究," The 2007 Annual Conference of The Chinese Society For Materials Science, 國立交通大學, Hsinchu, Taiwan, 2007.11
全國性研討會, NSC95-2221-E-214-015-MY3

69.方冠儒、 鄭憲清、 張量然、 邱家宇、 蕭証文, "結合機械合金法與急凝法製作鎂基非晶複合合金並探討其加工性與機械性質," The 2007 Annual Conference of The Chinese Society For Materials Science, 國立交通大學, Hsinchu, Taiwan, 2007.11
全國性研討會, NSC95-2221-E-214-015-MY3

70.李宗雄 、 鄭憲清、 邱家宇、 李威錚、 李易遂, "添加銀對Mg58Gd11Cu31塊狀非晶質合金的玻璃形成能力與熱穩定性影響之研究," The 2007 Annual Conference of The Chinese Society For Materials Science, pp.P08-070, 國立交通大學, Hsinchu, Taiwan, 2007.11, 全國性研討會, NSC95-2221-E-214-015-MY3

71.張鈞富、 鄭憲清、 黃宥祺、 李宗雄、 吳觀竹、 張量然, "添加微量矽元素對塊狀非晶質Zr53Cu30Ni9Al8玻璃形成能力與熱穩定性之研究," The 2007 Annual Conference of The Chinese Society For Materials Science, pp.P08-074, 國立交通大學, Hsinchu, Taiwan, 2007.11, 全國性研討會, NSC95-2221-E-214-015-MY3

72.鄭憲清、 黃宥棋、 李宗雄、 李易遂、 張量然, "在銅基塊狀金屬玻璃中添加矽對其玻璃形成能力及熱性質的影響," The 2007 Annual Conference of The Chinese Society For Materials Science, pp. P08-094, 國立交通大學, Hsinchu, Taiwan, 2007.11
全國性研討會, NSC95-2221-E-214-015-MY3

73.符志強、 陳遵仲、 鄭憲清、 王斯可, "環境及應變速率對添加硼與鉻之鎳矽基介金屬合金顯微結構及高溫機械行為之影響," The 2007 Annual Conference of The Chinese Society For Materials Science, pp.P08-112, 國立交通大學, Hsinchu, Taiwan, 2007.11
全國性研討會

74.蔡漢章、 符志強、 鄒志文、 李易遂、 鄭憲清、 許傳宗, "Ni-25Al-27.5Fe-1.0Nb介金屬合金經壓軋後顯微結構及機械性質之研究," The 2007 Annual Conference of The Chinese Society For Materials Science, pp.P08-114, 國立交通大學, Hsinchu, Taiwan, 2007.11
全國性研討會

75.J. S. C. Jang, C. T. Tseng, L. J. Chang, and J. C. Huang, "Thermal and Mechanical Properties of the Mg58Cu31Y11-xNdx (x = 0 ~ 11) Amorphous Alloys," 第四届海內外中華青年材料科學技術研討會暨第十一届全國青年材料科學技術研討會, 中國 重慶, 2007.10, 國際性研討會 , NSC95-2221-E-214-015-MY3, NSC96-2218-E-110-006

76.Jason S. C. Jang, C. T. Tseng, L. J. Chang, J. C. Huang, Chi Y.A. Tsao, Y. C. Yeh, and J. L. Jou, , "Superplastic Deformation Behavior of Mg58Cu31Nd5 Y6 Bulk Metallic Glass within the supercooled liquid temperature region.," The 14th International Symposium on Metastable and Nanostructured Materials ( ISMANAM 2007 ), Corfu Island,希臘, 2007.08
國際性研討會, NSC95-2221-E-214-015-MY3, NSC95-2218-110-006

77.鄭憲清, "Glass Forming Ability and Thermal Stability of the Zr53Cu30Ni9Al8 Based Bulk Metallic Glass Microalloyed With Silicon.," The 14th International Symposium on Metastable and Nanostructured Materials ( ISMANAM 2007 ), Corfu Island,希臘, 2007.08
國際性研討會,單一作者, NSC95-2221-E-214-015-MY3

78.鄭憲清, "Microstructures and Mechanical Behaviors of Mg58Cu31Gd11 and Mg65Cu25Gd10 Amorphous Alloys Synthesized by Drop Casting and Melt Spinning.," The 14th International Symposium on Metastable and Nanostructured Materials ( ISMANAM 2007 ), Corfu Island,希臘, 2007.08
國際性研討會,單一作者, NSC95-2221-E-214-015-MY3

79.C.S. Wu ，Jason Shian-Ching Jang，C.W. Chu，W.C. Liu, "Development of LED packaging transparent thin film with moisture barrier and electrical conducting characteristics," Metal Industries Research &Development Centre, Kaohsiung，Taiwan，R.O.C, 2006.12
全國性研討會

80.C.W. Chu, Jason S.C. Jang, S.M. Chiu, H.B. Yang, "Tribological properties of Cr2N ceramic films with W&C dopants," Metal Industries Research &Development Centre, Kaohsiung，Taiwan，R.O.C, 2006.12
全國性研討會

81.H.M.Chen，Y.C.Chang，T.H.Hung，J.C.Huang，J.S.C. Jang, "The Glass Forming Ability and Mechanical Properties of Mg-Cu-Gd Bulk Metallic Glasses," 2006中國材料科學年會, 成功大學，Taipei，Taiwan, 2006.11
全國性研討會, NSC94-2216-E110-010

82.K.F.Chang，M.-L.T.Guo，Chi Y.A.Taso，J.S.C.Jang，J.C.Huang, "Mg-Cu-Gd Layered Composite Plate Synthesized via Spray Forming Process," 2006中國材料科學年會, 成功大學，Taipei，Taiwan, 2006.11
全國性研討會, NSC94-2216-E006-010

83.鄭憲清，王怡華，張量然，張均富，黃宥祺，蕭証文, "Zr60Al7.5Ni10Cu17.5Si4B1非晶質合金之結晶行為及熱穩定性之探討," 2006中國材料科學年會, 成功大學，Taipei，Taiwan, 2006.11
全國性研討會, NSC93-2216-E214-002，NSC93-2216-E214-008，and NSC94-

84.楊博丞，鄭憲清，張量然，李威錚，李宗雄，黃志青, "Glass Forming Thermal Properties of the Mg65Cu25Gd10-xNdx(x=0~10) Amorphous Alloys," 2006中國材料科學年會, 成功大學，Taipei，Taiwan, 2006.11
全國性研討會, NSC93-2216-E-214-002，NSC94-2218-E-110-009

85.鍾志明，符志強，張均富，曾慶聰，鄭憲清, "應變數率及環境對添加硼與鉻元素之鎳矽基介金屬合金機械行為影響," 2006中國材料科學年會, 成功大學，Taipei，Taiwan, 2006.11
全國性研討會

86.L.J.Chang ，G.R.Fang ，C.Y.Chiu ，J.S.C.Jang，J.C.Huang，Chi Y.A.Tsao, "Mmechanical Properties of the Mg-based Amorphous/Nano Zirconia Composite Alloy," 2006中國材料科學年會, 成功大學，Taipei，Taiwan, 2006.11
全國性研討會, NSC94-2218-E-110-009

87.L. J. Chang, G. R. Fang, I. S. Lee, J. S. C. Jang, J. C. Huang, Chi Y.A. Tsao, "Mechanical Properties of the hot-pressed Mg65Cu20Y10Ag5 amorphous/ nanoZrO2 composite Alloy," The 5th International Conference on Bulk Metallic Glasses (BMG V), Osaka, Japan, 2006.10
國際性研討會, NSC94-2216-E-214-002, NSC94-2216-E-110-021

88.C. C. Tseng, L. J. Chang, C. F. Chang, W. J. Lee, J. S. C. Jang, J. C. Huang , and C. T. Liu, "Glass forming ability and thermal properties of the Mg based amorphous alloys with dual rare earth elements addition," The 5th International Conference on Bulk Metallic Glasses (BMG V), Osaka, Japan, 2006.10
國際性研討會, NSC94-2216-E-214-002, NSC94-2216-E-110-021

89.L. J. Chang, G. R. Fang, I. S. Lee, J. S. C. Jang, J. C. Huang, Chi Y.A. Tsao, "Hot workability of the Mg65Cu20Y10Ag5 amorphous/ nanoZrO2 composite alloy within supercooled temperature region," The Fifth Straight Conference on Composite Materials, 中國 上海, 2006.10, 國際性研討會, NSC94-2216-E-214-001, NSC94-2216-E-110-021

90.Jason S. C. Jang, "Thermal Properties and Crystallization Behavior of Zr-Al-Cu-Ni Based Amorphous Alloy with Metalloid Element Additions," 2006 Taiwanese-German Conference on Materials Science, Aachen, Germany, 2006.08
國際性研討會

91.L. J. Chang, J. H. Young, B.C. Jiang, J.S.C. Jang, J. C. Huang, Chi Y.A. Tsao, "MECHANICAL PROPERTIES OF THE MG-BASED AMORPHOUS/NANO ZIRCONIA COMPOSITE ALLOY," THERMEC 2006, Vancouver, Canada, 2006.07
國際性研討會, NSC93-2216-E-214-015 and NSC94-2218-E-110-009

92.L. J. Chang, B. C. Yang, P.T. Chiang, J. S. C. Jang, and J. C. Huang, "Glass Forming and Thermal Properties of the Mg65Cu25Gd10-xNdx (x=0 ~ 10) Amorphous Alloys," THERMEC 2006, Vancouver, Canada, 2006.07
國際性研討會, NSC93-2216-E-214-002 and NSC94-2218-E-110-009

93.C. C. Fu, L. J. Chang, Y. C. Huang, P.W. Wong, and J. S. C. Jang, "Microstructure and Mechanical Properties of Solid-Phase Sintered Heavy Tungsten Alloy," THERMEC 2006, Vancouver, Canada, 2006.07
國際性研討會, NSC94-2623-7-214-001 and NSC94-2218-E-110-009

94.T. H. Hung, Y. C. Chang, H. M. Chen, Y. L. Tsai, J. C. Huang, J. S. C. Jang, and T. G. Nieh, "Thermal and Mechanical Properties of Mg-Cu(Ni)-Y(Gd) Amorphous Alloys," THERMEC 2006, Vancouver, Canada, 2006.07
國際性研討會, NSC94-2218-E110-009

95.鄭憲清、 張量然、 楊博丞、 黃宥棋、 黃志青, "Crystallization and Thermal stability of the Mg65Cu25-xGd10Agx (x=0~10) alloys," 台灣鎂合金協會九十五年度論文發表會, pp.1-6, 台北, Taiwan, 2006.06
全國性研討會, NSC93-2216-E-214-002 and NSC94-2218-E-110-009

96.洪子翔、 張育誠、 陳海明、 蔡育霖、 黃志青、 鄭憲清, "Mg-Cu(Ni)-Y(Gd)非晶質合金之熱機械性質," 台灣鎂合金協會九十五年度論文發表會, pp.35-40, Taipei, Taiwan, 2006.06
全國性研討會, NSC93-2216-E-214-002 and NSC94-2218-E-110-009

97.張耕輔、 郭敏郎、 龔榮豪、 曹紀元、 黃志青、 鄭憲清, "Mg-Cu-Gd Layer-Composite Plate Synthesized via Spray Forming Process," 台灣鎂合金協會九十五年度論文發表會, pp.67-74, Taipei, Taiwan, 2006.06
全國性研討會, NSC93-2216-E-214-002 and NSC94-2218-E-110-009

98.龔榮豪、 郭敏郎、 張耕輔、 曹紀元、 黃志青、 鄭憲清, "The study of Mg-Cu-Y Bulk Metallic Glass Plate via Spray Forming Process," 台灣鎂合金協會九十五年度論文發表會, pp.113-120, Taipei, Taiwan, 2006.06
全國性研討會, NSC93-2216-E-214-002 and NSC94-2218-E-110-009

99.Chi-Wen Chu, Jason Shian-Ching Jang, MJH Hsieh, Wen-Jun Chou, and P. W. Wang, "Tribological properties of Cr2N Ceramic films with Tungsten Dopants," International Conference on Metallurgical Coating and Thin Films (ICMCTF 2006), San Diego, CA, USA, 2006.05
國際性研討會

100.C.-W. Chu, Jason Shian-Ching Jang, Pai-Tsung, Chiang, S.M. Chiu, "Use Tunnel Coating Thin Film Tech. For Mading Light Unit," International Conference on Metallurgical Coating and Thin Films (ICMCTF 2006), San Diego, CA, USA, 2006.05
國際性研討會

101.J. S. C. Jang, L. J. Chang , Y. H. Wang, Y. C. Huang, T. H. Hung, and J. C. Huang, "Thermal Properties of the Zr-Al-Cu-Ni Based Amorphous Alloys added with Boron and Silicon," 2005 Annual Conference of The Chinese Society For Materials Science, 淡江大學Taipei, Taiwan,, 2005.11
全國性研討會, NSC93-2216-E-214-002, NSC93-2216-E-214-008, NSC93-

102.J.S.C. Jang, J.C. Fwu, L.J. Chang, G.J. Chen, and C.T. Hsu, "Microstructure Evolution of the Solid-phase Sintering by the Nano-structured Heavy Tungsten Alloy Powder," 2005 Annual Conference of The Chinese Society For Materials Science, 淡江大學Taipei, Taiwan, 2005.11
全國性研討會

103.J. S. C. Jang, L. J. Chang, J. H. Young, J. Y. Ciou, J. C. Huang, Chi Y.A. Tsao, "Study on the Synthesis and of the Mg-Based Amorphous/ Nano ZrO2 Composite Alloy," 2005 Annual Conference of The Chinese Society For Materials Science, 淡江大學Taipei, Taiwan, 2005.11
全國性研討會, NSC93-2216-E-214-002, NSC93-2216-E-214-008, NSC93-

104.L. J. Chang, J. S. C. Jang, B. C. Yang, W. J. Li, S. J. Wu, and J. C. Huang, "Thermal Properties and Crystallization of the Mg65Cu25-xGd10Agx (x=0 ~ 10) Amorphous Alloys," 005 Annual Conference of The Chinese Society For Materials Science, 淡江大學Taipei, Taiwan, 2005.11
國際性研討會, NSC93-2216-E-214-002, NSC93-2216-E-214-008, NSC93-

105.Y. T. Cheng, T. H. Hung, J. C. Huang, P. J. Hsieh, and J. S. C.Jang, "Therma stability and Crystalization Kinetics of Mg-Cu-Y-B quaternary Alloys," 2005 Annual Conference of The Chinese Society For Materials Science, 淡江大學Taipei, Taiwan, 2005.11
全國性研討會, NSC93-2216-E-214-002, NSC93-2216-E-214-008, NSC93-

106.陳怡婷、 李國榮、 鄭憲清、 廖泓俊, "以液相TEOS及Boehmite混合漿體製作碳纖維/陶瓷基磨擦材料製程及性質研究," 2005 Annual Conference of The Chinese Society For Materials Science, 淡江大學Taipei, Taiwan, 2005.11
全國性研討會

107.鄭憲清陳國駒符志强張量然劉國璽陳福盛, "奈米結構重鎢合金粉之固相燒結研究," 國科會(2005)94年度國防科技學術合作小組成果發表會, pp.16, 桃園縣龍潭鄉, Taiwan, 2005.11
全國性研討會, NSC94-2623-7-214-001

108.J. S. C. Jang, I. H. Wang, L. J. Chang, G. J. Chen, T. H. Hong and J. C. Huang, "Crystallization Kinetics and Thermal Stability of the Zr60Al7.5 Cu17.5Ni10Si4B1 Amorphous Alloy by Isothermal DSC and TEM Observation," 12th Conference of Rapidly Quenched and Metastable Materials (RQ 12), Chijou, Korea, 2005.08
國際性研討會

109.Y. T. Cheng, T. H. Hung, J. C. Huang , P. J. Hsieh, J. S. C. Jang, "Thermal stability and crystallization kinetics of," 12th Conference of Rapidly Quenched and Metastable Materials (RQ 12), Chijou, Korea, 2005.08
國際性研討會

110.J. S. C. Jang, J. C. Fwu, L. J. Chang, B. C. Yang, J. F. Chang, and C. T. Hsu, "Study on the Solid-Phase Sintering by the Nano-Structured Heavy Tungsten Alloy Powder," International Symposium on Metastable and Nano Materials (ISMANAM 2005), Paris, France, 2005.07
國際性研討會

111.L. J. Chang, J. S. C. Jang, B. C. Yang, J. F. Chang, and J. C. Huang, "Crystallization and Thermal Stability of the Mg65Cu25-xGd10Agx (x=0, 5, 10) Alloys," International Symposium on Metastable and Nano Materials (ISMANAM 2005), Paris, France, 2005.07
國際性研討會

112.M.L. Ted Guo , Chi Y. A. Tsao , , J.S.C. Jang , J.C. Huang, "Microstructure Evolution of Spray-Formed Bulk Hybrid Composite and Melt-Spun Ribbon Hybrid Composite Consisting of Amorphous and Nanostructured Phases of Al89Nd4Ni5Cu2," The 4th International Conference on Bulk Metallic Glasses (BMG IV), Gatlingurg, Tennessee, USA, 2005.05
國際性研討會

113.Y. T. Cheng, T. H. Hung, J. C. Huang, and J. S. C. Jang, "EFFECTS OF PARTIAL REPLACEMENT OF CU AND Y BY BORON IN MG-CU-Y ALLOY," The 4th International Conference on Bulk Metallic Glasses (BMG IV), Gatlingurg, Tennessee, USA, 2005.05
國際性研討會

114.L. J. Chang, J. S. C. Jang, J. H. Young, J. C. Huang, Chi Y.A. Tsao, "Synthesis and Characterization of the Mg-Based Amorphous/ Nano ZrO2 Composite Alloy," The 4th International Conference on Bulk Metallic Glasses (BMG IV), Gatlingurg, Tennessee, USA, 2005.05
國際性研討會

115.J. S. C. Jang, S. C. Lu, L. J. Chang, T. H. Yang, and J. C. Huang, "Thermal Stability and Crystallization of Zr-Al-Cu-Ni BasedAmorphous Alloy Added with Boron and Silicon," The 4th International Conference on Bulk Metallic Glasses (BMG IV), Gatlingurg, Tennessee, USA, 2005.05
國際性研討會

116.Mo-Hua Yang, Bing-Ming Lin, Hon-His Chang, Shiow-Huey Suen, Hsueh-Mei Lee, and Jason Shian-Ching Jang, "Light Electric Vehicle Progress in Taiwan," The 21st Worldwide Battery and Hybrid Fuel Cell Electric Vechile Sympoosium and Exhibition, Monaco, 2005.04
國際性研討會

117.L. J. Chang, J. H. Young, J. S. C. Jang, J. C. Huang, and Chi Y. A. Tsao, "Synthesis of the magnesium-based nano/amorphous-composite alloy powder by the combination method of melt-spinning and mechanical alloying," Composite Material Conference 2005, Cheng Kung University, Tainan, Taiwan, 2005.03
全國性研討會

118.Y.P. Hung, K.J. Wu, Chi Y.A. Tsao, J.C. Huang, P.L. Hsieh, J.S.C Jang, "AZ61 Mg with nano SiO2 particles prepared byspray forming plus extrusion," Composite Material Conference 2005, Cheng Kung University, Tainan, Taiwan, 2005.03
全國性研討會

119.J. S. C. Jang, J. C. Fwu, L. J. Chang, D. Y. Lin, C. M. Kuo, S. J. Wu, and H. Y. Bor, "The Effect of Strain Rate and Environment on the Mechanical Behavior of the Ni-19Si-3Nb-0.15B-0.1C Intermetallic Alloy at High Temperature," 2005 TMS Annual Meeting & Exhibition,, San Francisco, California, USA, 2005.02
國際性研討會

120.Wu, S.-J., Jang, S.-C. J., Kuo, C.-M., Lin, D.-Y., and Ting, C.-C, "Acoustic Properties of Ni3Si Intermetallic Materials," 2005 TMS Annual Meeting & Exhibition, San Francisco, California, USA, 2005.02
國際性研討會

121.Lin, D.-Y., Hsu, J.-S., Yen, S.-S., Jang, S.-C. J., Kuo, C.-M., and Wu, S.-J, "The Influence of Boron/Carbon Alloying on the Corrosion Behavior of NiSi19Nb3 Super alloy," 2005 TMS Annual Meeting & Exhibition, San Francisco, California, USA, 2005.02
國際性研討會

122.J. S. C. Jang, J. C. Fwu, L. J. Chang, D. Y. Lin, C. M. Kuo, and S. J. Wu, "Environment Dependence on the High Temperature Mechanical Properties of the Ni-19Si-3Nb-0.15B-0.1C Intermetallic Alloy," 2004中國航太學會/中華民航學會聯合學術研討會，, 台中，中華民國九十三年十二月, 2004.12
全國性研討會

123.許正昇，顏筱珊，歐仲仁，林東毅，鄭憲清，郭振明，吳士傑, "硼與碳元素的添加對Ni-19Si-3Nb基介金屬合金耐孔蝕性影響之研究," 2004中國航太學會/中華民航學會聯合學術研討會, 台中，中華民國九十三年十二月, 2004.12
全國性研討會

124.蔡政偉 鍾志明 符志強 鄭憲清, " 添加鈦對鎳矽基介金屬合金顯微結構及常溫機械性質之影響," Proceedings of The 2004 Annual Conference of The Chinese Society For Materials Science, Hsinchu, Taiwan, R.O.C, 2004.11
全國性研討會

125.J. S. C. Jang, L. J. Chang, J. H. Young, and J. C. Huang, , "Synthesis of the Nano-composite Magnesium-based Alloy Powder by the combination method of melt-spinning and Mechanical Alloying," IUMRS 2004, Hsichu, Taiwan, ROC, 2004.11
國際性研討會

126.J. S. C. Jang, S. C. Lu, L. J. Chang, T. H. Hung, J. C. Huang, and Chi Y. A.Tsao, "Crystallization and Thermal Properties of Zr-Al-Cu-Ni Based Amorphous Alloy Added with Boron and Silicon," ISMANAM 2004, August 12-17, 2004, Sendai, Japan, 2004.08
國際性研討會

127.J. S. C. Jang, S. F. Tsau, L. J. Chang, G. J. Chen, J. C. Huang, and C. Y. Tsao, "Crystallization Kinetics of the Zr61Al7.5 Cu17.5Ni10Si4 Alloy Using Isothermal DSC and TEM observation," ISMANAM 2004, Sendai, Japan, 2004.08
國際性研討會

128.Jason S. C. Jang, L. J. Chang, Y. T. Jiang, T. F. Huang, and P. W. Wong, "Study of the Thermal Properties of Zr61Al7.5Cu17.5Ni10B4 Bulk Amorphous Alloy," TMS 2004 Annual Meeting, March 14-18, 2004,Charlotte, NC , USA, 2004.03
國際性研討會

129.J. S. C. Jang, Y. W. Chen, L. J. Chang, and G. J. Chen, "Crystallization Behavior and Thermal properties of the Zr61Al7.5Cu17.5Ni10Si4 Bulk Amorphous Alloy," TMS 2004 Annual Meeting, March 14-18, 2004,Charlotte, NC , USA, 2004.03
國際性研討會

130.Jason S. C. Jang(鄭憲清)、 Y. W. Chen(陳郁文)、 C. C. Lu (盧斯誠)、 M. C. Yah(葉銘騏), "添加矽對ZrAlCuNi塊狀非晶質合金結晶行為的影響," 中國材料學會2003年年會, pp.PA-044, 崑山科技大學,台南,台灣, 2003.11
全國性研討會

131.J. C. Fwu, Jason S. C. Jang, and C. M. Chung, "Strain Rate and Environment Dependence on the Mechanical Behavior of the Ni-19Si-3Nb Based Intermetallic Alloy Doped with Boron and Carbon," Proceedings of The 2003 Annual Conference of The Chinese Society For Foundry, pp.PA-29, Nov. 21-22, 2003, Tainan, Taiwan, R.O.C., 2003.11
全國性研討會

132.鄭憲清、 劉國璽、 許傅宗、 陳嘉昌、 楊政翰, "W-Ni-Fe-Co重合金機械合金法合成奈米組織發展之研究," Proceedings of The 2003 Annual Conference of The Chinese Society For Foundry ., pp.PA-043, (Nov. 21-22, 2003, Tainan, Taiwan, R.O.C.), 2003.11
國際性研討會

133.鄭憲清、 陳郁文、 盧斯誠、 葉銘祺, "添加矽對ZrAlCuNi塊狀非晶質合金結晶行為的影響," Proceedings of The 2003 Annual Conference of The Chinese Society For Foundry, pp.PA-044, Nov. 21-22, 2003, Tainan, Taiwan, R.O.C., 2003.11
全國性研討會

134.鄭憲清、 張量然、 王姵文、 楊博丞, "添加硼對ZrAlCuNi塊狀非晶質合金機械性質的影響," Proceedings of The 2003 Annual Conference of The Chinese Society For Foundry, pp.PB-068, Nov. 21-22, 2003, Tainan, Taiwan, R.O.C., 2003.11
全國性研討會

135.Jason S. C. Jang, L. J. Chang, Y. T. Jiang, and P. W. Wong, "Crystallization Behavior and the Thermal Properties of Zr63Al7.5Cu17.5Ni10B2 Bulk Amorphous Alloy," Thermec 2003, July 7-11, Leganes, Madrid, Spain, 2003.07
國際性研討會

136.Jason S. C. Jang, M. T. Chen, Y. W. Chen, M. C. Yea, S. T. Chung, and Weite Wu, "Effect of Silicon on the Thermal Properties of the Zirconium-based Bulk Amorphous Alloys," Thermec 2003, July 7-11, Leganes, Madrid, Spain, 2003.07
國際性研討會

137.Jason S. C. Jang, H. R. Wong, L. J. Chang, and S. J. Wong, "Effects of Environment and Temperature on The Mechanical Behavior of The Ni-19Si-3Nb-(B,C) Intermetallic Alloy," TMS 2003 Annual Meeting, March 11-15, 2003, San Diego, USA, 2003.03
國際性研討會

138.Jason S. C. Jang, J. C. Fwu, and B. H. Chen, "Stain Rate Dependence on the Mechanical Behavior of the Ni-19Si-3Nb Based alloy Doped with Boron and Carbon," Proceedings of The 2002 Annual Conference of The Chinese Society For Materials Science, pp.P-12-25, Taipei, Taiwan, R.O.C, 2002.11
全國性研討會

139.Jason S. C. Jang, T. H. Hung, and L. J. Chang, "Crystallization Behavior and the Thermal Properties of Zr63Al7.5Cu17.5Ni10B2 Bulk Amorphous Alloy," Proceedings of The 2002 Annual Conference of The Chinese Society For Materials Science, pp.P-12-25, Taipei, Taiwan, R.O.C., 2002.11
全國性研討會

140.Jason S. C. Jang, Y. W. Chen, and M. C. Yah, "Thermal Properties of theZr55Al7.5Cu17.5Ni10Si10 Bulk Amorphous Alloy," Proceedings of The 2002 Annual Conference of The Chinese Society For Materials Science, pp. P-12-25, Taipei, Taiwan, R.O.C, 2002.11
全國性研討會

141.Jason S. C. Jang, P. H. Chang, and J. C. Fwu, , "The Microstructure Change and Mechanical Properties forA Nickel Silicide Based Alloy Microalloyed With Carbon and Boron," Proceedings of The 2002 Annual Conference of The Chinese Society For Materials Science, pp.P-12-25, Taipei, Taiwan, R.O.C., 2002.11
全國性研討會

142.Jason S. C. Jang, J. C. Fwu, P. H. Chen), Z. H. Yang), and S. T. Chung, , "Microstructure and Room Temperature Mechanical Properties of The Ni-19Si-3Nb Based Alloy Doped with Boron and Carbon," Proceedings of The 2002 Annual Conference of The Chinese Society For Foundry, Kaohsiung, Taiwan, R.O.C., 2002.11
全國性研討會

143.J. S. C. Jang and L. J. Cheng, "The Effect of Heat Treatment on the Microstructure of the Ni-19Si-3Nb-0.15B Intermetallic Alloy," Proceedings of The IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in 21st Century, pp.A-102, National Chung Cheng University, Chia-Yi, Taiwan, R. O. C, 2002.08
全國性研討會

144.Jason S. C. Jang, T. H. Hung, and L. J. Chang, "The Effect of Boron on the Crystallization and Thermal Properties of the Zirconium-based Bulk Amorphous Alloys," Proceeding of the International Conference of RQ11 Rapidly Quenched & Metastable Materials, Oxford University, UK, 2002.08
國際性研討會

145.J. S. C. Jang and L. J. Cheng, "Evolution of the Microstructure Change of the Ni-19Si-3Nb-0.15B Intermetallic Alloy by Heat Treatment," Proceeding of The 4th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 4, pp.56-62, Hawaii, U.S.A., 2001.12
國際性研討會

146.J. S. C. Jang, L. J. Cheng, and W. T. Liu, "The Microstructure and Mechanical Properties of a Nickel Silicide Based Alloy Doped With Carbon," Proceedings of The 2001 Annual Conference of The Chinese Society For Materials Science, pp.O-02-08, Taichiung, 2001.11
全國性研討會

147.J. S. C. Jang, T. S. Hon, and L. J. Cheng, "Crystallization Behavior of A ZrAlCuNi Bulk Amorphous Alloy Doped With Boron," Proceedings of The 2001 Annual Conference of The Chinese Society For Materials Science, pp.P-12-05, Taichiung, 2001.11
全國性研討會

148.J. S. C. Jang, M. J. Chen, "Effect of Silicon addition on the Crystallization Behavior of A ZrAlCuNi Based Bulk Amorphous Alloy," Proceedings of The 2001 Annual Conference of The Chinese Society For Materials Science, pp.P-12-25, Taichiung, 2001.11
全國性研討會

149.J. S. C. Jang, C. J. Ou, and C. Y. Cheng, "The Microstructure Change and Mechanical Behavior of the Ni-19Si-3Nb Based Alloy Doped with Boron," Proceedings of The 2000 Annual Conference of The Chinese Society For Materials Science, pp.B-10, Kaohsiung, 2000.11
全國性研討會

150.J. S. C. Jang and H. P. Shih, "Synthesis of The Nano-structured Nickel-Based Brazing Filler by Mechanical Alloying," Nano-structured and Amorphous Materials Symposium, pp.25-31, Chinese Culture University, Taipei, 2000.04
全國性研討會

151.H. P. Shih and J. S. C. Jang, "Study of the Fabrication and the Properties for the Nickel-Based Brazing Filler (Bni-2) Synthesized by Mechanical Alloying," Proceedings of The 1999 Annual Conference of The Chinese Society For Materials Science, pp.B-50, Hsinchu, 1999.11
全國性研討會

152.J. S. C. Jang and C. J. Ou, , "Effects of Microalloying With Boron and Carbon on The Mechanical Behaviors of A Ni-19Si-3 Nb Based Alloy," Proceedings of The 1999 Annual Conference of The Chinese Society For Materials Science, pp.B-71P, Hsinchu, 1999.11
全國性研討會

153.C. Y. Cheng and J. S. C. Jang, "The Microstructure Change of Ni-19Si-3 Nb Based Alloy Doped With Carbon," Proceedings of The 1999 Annual Conference of The Chinese Society For Materials Science, pp.B-73P, Hsinchu, 1999.11
全國性研討會

154.Jason S. C. Jang and Ching-Lung Chang, "The Synthesis of Nickel –Based Brazing Filler by Mechanical Alloying," Proceedings of The 1998 Annual Conference of The Chinese Society For Materials Science, pp.C-31P, 1998.11
全國性研討會

155.J. S. C. Jang, S. K. Wong, and C. H. Tsau, "The Effect of Boron on the Mechanical Behaviors of A Ni-19Si-3Nb Based Alloy," The Third Pacific Rim International Conference on Advanced Materials and Processing, pp.1989-1994, Honolulu, Hawaii, USA, 1998.07
國際性研討會

156.Chun-Huei Tsau, Shian-Ching Jang, Jien-Wei Yeh, "The Composite Structure Effect on the Mechanical Properties of Ni-25Al-xFe Intermetallics," Proceeding of the International Conference of THERMEC'97, 1997.07
全國性研討會

157.J.C. Liu, S.F. Chang, S.S. Wu, S.C. Jang, "Computer Simulation of Solidification in Ohno Continuous Casting Processing," Proceedings of the International Conference on Modeling and Simulation in Metallurgical Engineering and Materials Science, pp.357-360, 1996.01
全國性研討會

158.J.S.C. Jang, C.H. Tsau, and T.C. Tsai, "The Temperature Dependence on The Mechanical Properties of The Mechanical Properties of The Ni-19Si Based Alloys," Proceedings of The 1994 Annual Conference of The Chinese Society For Matericals Science, pp.506-507, 1994.01
全國性研討會

159.C.H. Tsau, J.S.C. Jang, and J.W. Yeh, "The Effect of Cr Additions on The Mechanical Properties of Ni-25 Al-27.5 Fe Based Intermetallic Compounds," Proceedigns of The 1994 Annual Conference of The Chinese Society For Matericals Science, pp.502-503, 1994.01
全國性研討會

160.林惠娟、 黃振東、 鄭憲清, "雙滾輪薄鋼片連鑄製程之電腦模擬," Proceedigns of The 1994 Annual Conference of The Chinese Society For Matericals Science, pp.442-443, 1994.01
全國性研討會

161.劉家欽、 張樹發、 吳學陞、 鄭憲清, "The Study of Cu-5%Ag Alloy Produced by Heated Mold Continuous Casting Method," Proceedigns of The 1994 Annual Conference of The Chinese Society For Matericals Science, pp.438-439, 1994.01
全國性研討會

162.黃振東、 楊智超、 鄭憲清, "鋁合金改良處理對機械性能及流動性的影響," Proceedigns of The 1994 Annual Conference of The Chinese Society For Matericals Science, pp.434-435, 1994.01
全國性研討會

163.Chun-Huei Tsau, Shian-Ching Jang, "Structure Investigation in B2-phased Ni-Al-Fe Compound," Proceeding of the 15th R.O.C. Symposium on Electron Microscopy, pp.69-70, Taiwan, 1994.01
全國性研討會

164.Chun-Huei Tsau, Shian-Ching Jang, "Mechanical Properties of Ni-Al-Fe-X Compounds Based on The Ni-25Al-27.5Fe System," Proceedings of the 2nd IUMRS International Conference in Asia, pp.325-330, 1994.01
全國性研討會

165.Ming-Sheng Leu, Jason S.C. Jang, Chuen-Cheng Lin, "The Effect of Compositions on the Crystallization and Magnetic Transition of Fe-Si-B Amorphous Alloys," Proceedings of the 2nd IUMRS International Conference in Asia, pp.385-390, 1994.01
全國性研討會

166.C.H. Tsau, S.C. Jang, H.Y. Tsai, H.J. Lin, J.D. Hwang and T.C. Du, "The Study of Strip Casting Process," Proceedings of The 1993 Annual Conference of The Chinese Branch For The Iron & Steel Society of South-East Asia, pp.41-46, 1993.01
全國性研討會

167.C.H. Tsau, S.C. Jang, H.Y. Tsaim H.J. Lin, J.D. Hwang, and T.C. Du, "The Effect of Heat Treatment on The Properties of SUS 304 Strip Casting Product," Proceedings of The 1993 Annual Conference of The Chinese Society For Materials Science, pp.1.9-1.10, 1993.01
全國性研討會

168.J.S.C. Jang, and C.H. Tsau, "The Effect of Cr Addition On The Mechanical behaviors of Ni-19Si(Nb, Cr) Alloy," Proceedings of The 1993 Annual Conference of The Chinese Society For Materials Science, pp.1.9-1.10, 1993.01
全國性研討會

169.C.H. Tsau, and J.S.C. Jang, "Study on The Microstructures of Rapidly Quenched Ni-Al-Fe Compounds," in EPD Congress 1992, Proceedings of The TMS, pp.945-952, 1992.01
全國性研討會

170.J.S.C. Jang, H.Y. Tsai, C.H. Tsau, and C.J. Chen, "Factors Affecting The Properties of Rapidly Solidified Fe-6.5 wt.% Si Alloy In Melt-Spinning Method," in Melt-spinning and Strip Casting, Proceeding of the TMS annual meeting, pp.95-106, 1992.01
全國性研討會

171.J.D. Hwang, H.Y. Tsai, H.J. Lin, and S.C. Jang, "Fe-4.5 wt.% Si 合金薄片鑄造製程參數分析," Proceedings of The 1992 Annual Conference of The Chinese Society For Materials Science, pp.16-17, 1992.01
全國性研討會

172.J.S.C. Jang, and C.H. Tsau, "The Effect of Nb Additions On The Mechanical properties of An Ni3Si Based Alloy," Proceedings of The 1992 Annual Conference of The Chinese Society For Materials Science, pp.134-135, 1992.01
全國性研討會

173.C.H. Tsau, and J.S.C. Jang, "Microstructures and Mechanical Behaviors of Ni-Al-Fe Intermetallic Compounds," Proceedings of The 1992 Annual Conference of The Chinese Society For Materials Science, pp.100-101, 1992.01
全國性研討會

174. 174.J.S.C. Jang, H.Y. Tsai, and C.H. Tsau, "Factors Affectign The Quality of Rapidly Quenched Fe-6.5 wt.% Si Alloy In The Melt-Spinning Method," Proceedings of The 1991 Annual Conference of The Chinese Society For Materials Science, pp.60-61, 1991.01
     全國性研討會
     

175. 175.J.S.C. Jang, "Stability of The Ni3Si Ordered Intermetallic During Mechanical Milling," Proceedings of The 1991 Annual Conference of The Chinese Society For Materials Science, pp.166-167, 1991.01
     全國性研討會
     

176. 176.J.S.C. Jang, and C.H. Tsau, "Destabilization of Ni3Si Intermetallic Compound By Mechanical Milling," Proceedings of The 12th R.O.C. Symposium on Electron Microscopy, pp.55-56, Taiwan, 1991.01
     全國性研討會
     

177. 177.J.S.C. Jang, C.C. Koch, "Disordering of The Ni3Al Ordered Intermetallic by Mechanical Milling," Proceedings of The 11st R.O.C. Symposium on Electron Microscopy, pp.86-87, Taiwan, 1990.01
     全國性研討會
     

178. 178.J.S.C. Jang, C.C. Koch, "Real Glass-Transition In Amorphous Cu1-xZrx Alloys Synthesized By Mechanical Alloying/Milling," Proceedings of The Chinese Society For Materials Science, pp.28-32, 1990.01
     全國性研討會
     

179. 179.C.H. Tsau, J.S.C. Jang, and Y.S. Pan, "Characteristics of Ni-Al-Fe Intermetallic Compound," Proceedings of The 1991 Annual Conference of The Chinese Society For Materials Science, pp.164-165, 1990.01
     全國性研討會